• April 19, 2024, 03:42:09 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Weather Direct gateway does not get address  (Read 6462 times)

denzelnuke

  • Level 1 Member
  • *
  • Posts: 1
Weather Direct gateway does not get address
« on: April 26, 2010, 06:43:05 PM »
I can't get my Weather Direct gateway to obtain an address when connected to my router.  If anyone is familiar with this, I get the 2 blinking red light that means the gateway is not getting an IP address from the router.

http://www.weatherdirect.com/help/gatewayhelp.aspx

I have talked to technical support from Lacrosse and they have even sent me another gateway, but I get the same two blinking red light. 

DHCP is enabled and no other device I have (several - both wired and wireless) has a problem connecting. 

What should I be looking at?  What can I try?

Logged

jdlemme

  • Level 1 Member
  • *
  • Posts: 2
Re: Weather Direct gateway does not get address
« Reply #1 on: January 30, 2011, 01:23:59 PM »
Have you figured this out yet?? I have the EXACT SAME ROUTER (DIR-65) and the same WeatherDirect Gateway problem....I thought I was going crazy until I saw your post. Please let me know if you found a way to resolve this. I am at a total loss as to how this can be possible?!?!
Logged

davevt31

  • Level 9 Member
  • ****
  • Posts: 1590
Re: Weather Direct gateway does not get address
« Reply #2 on: January 30, 2011, 02:02:24 PM »
Are you doing any MAC address filtering on your router?
Logged

jdlemme

  • Level 1 Member
  • *
  • Posts: 2
Re: Weather Direct gateway does not get address
« Reply #3 on: February 02, 2011, 06:56:09 PM »
OMG...I didn't even think about that. Yes I was doing MAC address filtering, and I didn't put the MAC of this device in. It is not listed on the device, so I had to turn off MAC Filtering, and then do an ARP -a command in Windows Command Prompt to find the IP of the device as it booted up, and then I could see the MAC address of it. Once I added it to the list and re-enabled MAF, everything worked just fine.....Dang! Thanks for the heads up!
Logged

davevt31

  • Level 9 Member
  • ****
  • Posts: 1590
Re: Weather Direct gateway does not get address
« Reply #4 on: February 02, 2011, 08:23:09 PM »
Glad you got it worked out.
Logged

stevecash77

  • Level 1 Member
  • *
  • Posts: 2
Re: Weather Direct gateway does not get address
« Reply #5 on: June 18, 2011, 04:50:24 PM »
Hi:

How do i get the mac address off the arp-a?
Logged

davevt31

  • Level 9 Member
  • ****
  • Posts: 1590
Re: Weather Direct gateway does not get address
« Reply #6 on: June 18, 2011, 07:29:26 PM »
Open a Command prompt and type arp -a

This will show you all the IP addresses that your computer sees and it also their MAC address.
Logged

stevecash77

  • Level 1 Member
  • *
  • Posts: 2
Re: Weather Direct gateway does not get address
« Reply #7 on: June 19, 2011, 09:25:38 AM »
It shows me 8 addresses and I have only 1 computer  3 of them  start 192 2 with 224  1 with  228 1 239 and 1 225 that would be the DNS right?  Sorry for the dumb question.

Steve
Logged