D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-600M => Topic started by: MrPrince on November 04, 2016, 11:14:46 PM

Title: D-link DIR 600M Recovery Mode
Post by: MrPrince on November 04, 2016, 11:14:46 PM

Hi D-link Team

I had a D-link DIR 600M Router, recently it got automatically reseted, now im unable to login to the router for configuration.

now i want to reset the router or update the firmware and i tried the emergency recovery mode but it doesn't work for me.(http://forums.dlink.com/index.php?topic=44909.0)

Please help me.. :)


 

Title: Re: D-link DIR 600M Recovery Mode
Post by: FurryNutz on November 07, 2016, 06:58:53 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?
• Are you wired or wireless connected to the router?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

• Ensure devices are set to auto obtain an IP address.

PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again. (For older generation routers.)
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.

Title: Re: D-link DIR 600M Recovery Mode
Post by: MrPrince on November 07, 2016, 08:55:00 PM

Due to firmware upgarde to DIR-600M-V3.05B01, i am not able to config my router.
now im unable to login to the router for configuration.
Is there any other way to login  for configuring router (I am using wired connection)


(https://s11.postimg.org/i5ese3bqb/CAM00017.jpg)

Title: Re: D-link DIR 600M Recovery Mode
Post by: FurryNutz on November 08, 2016, 06:13:01 AM

Are you getting a IP address on your PC from the router at all? Look in your windows networking and status section or do a IPCONFIG /all from a command line.

If not, then you can see if you can get v3.01 back on to the router by following this procedure:
 Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.msg163599#msg163599)

Title: Re: D-link DIR 600M Recovery Mode
Post by: MrPrince on November 08, 2016, 08:18:39 PM

I Tried this already it doesn't work for my router D-link DIR 600M

Title: Re: D-link DIR 600M Recovery Mode
Post by: FurryNutz on November 09, 2016, 06:32:51 AM

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.