D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-810L => Topic started by: rbing on January 24, 2016, 07:44:42 AM
-
is there any way to only allow access to the web at certain times?
for example Wednesday night from 7:00pm to 10:00 pm I want to allow open access to the web
no other access
I do have other times that I want to allow access but that if the first example
hardware ver b1
firmware 2.02
Thanks
-
You would want to set up a access control rule. First, create a schedule. From UI Tools > Schedules. Then create a Access Control rule. From UI Advanced > Access Control > Enable Access Control. Apple the schedule to rule as you go through the Access Control Wizard. See page 75-77 of manual for more info. (http://www.dlink.com/-/media/Consumer_Products/DIR/DIR%20810L/Manual/DIR810LA1manual050913v10US.pdf)
-
I am not trying to restrict them to only a few sites
I want to all anyone to go anywhere using the access point but only during the allowed times
this is for a church and I am trying to set up a guest access point for visitors during services
when a vistor comes in they can connect to the guest access point and browse the web but only during allowed times
that way I do not have to turn off and turn on the access points but can leave them running but neighbors do not have free web access
any suggestions on how I can do this
thanks
-
Here some inf o I have about Blocking:
Router Access Control, Blocking, Web Filters and Scheduling FAQ (http://forums.dlink.com/index.php?topic=56479.0)
To set up scheduling:
1. Reserve device IP addresses ON the router under Setup/Networking.
2. Set up a schedule under Tools/Schedule on the routers web page. Customize your dates and times here.
3. Use Advanced/Access Control configured and apply the customized schedule to a policy and to the PC(s) or device(s) desired to be controlled.
4. Ensure Time is set correctly on the router. Tools/Time.
I do believe Setup/Networking/DNS Relay and or Setup/Internet/Manual/Advanced DNS Services need to be enabled along with configuring Reserved IP addresses, Scheduling, and Access Controls.
Additional Info:
How to Block a specific port using Access Control: http://forums.dlink.com/index.php?topic=58731.0 (http://forums.dlink.com/index.php?topic=58731.0)
How to set up Web Filters: http://www.dlink.cc/d-link-wireless/how-to-setup-website-filter-on-d-link-dir-series-router-dir-655.htm (http://www.dlink.cc/d-link-wireless/how-to-setup-website-filter-on-d-link-dir-series-router-dir-655.htm)
How to Block FB: http://forums.dlink.com/index.php?topic=50490.0 (http://forums.dlink.com/index.php?topic=50490.0)
Web Filter How To: http://forums.dlink.com/index.php?topic=5509.0 (http://forums.dlink.com/index.php?topic=5509.0)
How to configure access control on new UI: http://forums.dlink.com/index.php?topic=62516.msg254549#msg254549 (http://forums.dlink.com/index.php?topic=62516.msg254549#msg254549)
-
since I have no control on what devices will be connecting
I cannot resverve an ip for them
I wonder if ddwrt will work on these
anyone know?
will ddwrt do what I want
-
Is this router used at home or at a business?
Do you have a set of known connected devices? Or do you let any one connect?
Have you tried maybe setting a wireless schedule to have the wireless radios turn off at night then back on in the morning?
-
I want to all anyone to go anywhere using the access point but only during the allowed times
Then you would do as I suggested, but choose "Block All Access" at step 4 and set the schedule for the time frame you DON'T want them to get online.
this is for a church and I am trying to set up a guest access point for visitors during services
Are you using the router and internet for personal use too? Or will the router be connected to a isolated internet source? I ask because the router also has a Guest Zone.
-
I am using two dlink 810l
one at the north side and the other on the south side
they are only to give web access
I have 3 time frames that need to be set up
sun 8:30 to 11:30 am
sun 5:30 pm to 7:30 pm
wed 7:00 pm to 9:00 pm
all other times no access
no one needs to connect to the internal network
if I try the deny access I guess the schedules would be
deny
sun 11:30am to 5:30 pm
sun 7:30pm to wed 7:00pm
wed 9:00 pm to sun:8:30 am
that right?
-
That should work.