D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-932L => Topic started by: JavaLawyer on November 19, 2011, 03:31:32 PM
-
DCS-932L Cumulative Firmware Release Notes
DCS-932L - Rev A
Firmware: 1.10b03 - Date: 2/6/2015
- [New Feature] Upgrade mydlink agent to 2.0.18-b61
- [New Feature] Remove SSL, change to support TLS
Firmware: 1.09b01 - Date: 04/22/2014
- [Bug Fix] The event notification function has been restored
Firmware: 1.08b01 - Date: 01/22/2014
- [New Feature] When camera does not have feature, upgrade to a f/w with SSL certificate, it will automatically create a self signed cert (regenerated)
- [New Feature] When camera upgrades with a f/w with cert. (f/w with SSL certificate automatically self signed), the SSL certificate wll automatically create a new self-signed cert (regenerate)
- [New Feature] When camera is factory reset, the camera will automatically create a new self-signed SSL certificate
- [New Feature] New mydlink agent 2.0.17-b55
- [New Feature] Change the default FTP to passive mode
- [New Feature] Change WPS LED on 10 seconds after WPS succeed
- [New Feature] Change LANDAP protocol’s password length to 0-32 characters
- [New Feature] Change copyright from [2012-2013] to [2012-2014]
- [New Feature] Change camera default time from [2013-01-01] to [2014-01-01]
- [New Feature] Support Win 8.1 + IE 11
- [New Feature] Support Java 7 Update 51
- [New Feature] SSL Certificate will be automatically self signed (regenerated) during initial configuration/factory reset
Firmware: 1.07b02 - Date: 12/26/2013
- [New Feature] Add schedule feature for motion detection function
- [New Feature] Add user can configure interval setting for motion detection of mail/ftp
- [New Feature] NTP source port change to port 123
- [New Feature] User account name is limit as: 0-9, a-z, A-Z, “.”, “-“, “_”
- [New Feature] Update Mydlink agent to v2.0.17-b31
- [New Feature] Limit “Auto” FTP image frequency not over 5 frames/second
- [Bug Fix] Fixed ip task will be restarted issue on DHCP renew time
- [Bug Fix] Fixed E-mail/FTP cannot be started issue if motion detection is enabled first
- [Bug Fix] Fixed UpnP issue with DIR-826L router
- [Bug Fix] The max length of Admin password change to 32 characters
Firmware: 1.06b04 - Date: 12/21/2012
- [New Feature] Change maximum admin password length, from 8 characters to 30 characters
- [New Feature] Change PPPoE retry timing, retry connection on 30 seconds interval till connect
- [New Feature] New ActiveX to support long admin password.
- [New Feature] Default time change to 2013-01-01
- [New Feature] Change IR LED Night to Day switch timing to 7 seconds
Firmware: 1.05b05 - Date: 11/30/2012
- [New Feature] Add mydlink agent version displayed on Web UI
- [New Feature] Update Java program to support new mjpeg streaming format
- [New Feature] Change NTP request timing
- [Bug Fix] Fixed ios6 live view hang issue – modify mjpeg streaming format
- [Bug Fix] Fixed sometimes startup java view failed on Win 7 + IE9
- [Bug Fix] Fixed live view issue if http port is changed to 12345
- [Bug Fix] Fixed live view streaming cannot pass through router’s virtual server
- [Bug Fix] Fixed e-mail loss issue when live view the camera
Firmware: 1.04b05 - Date: 05/08/2012
- [New Feature] Secure the configuration file with the new changed encryption method
- [New Feature] Remove two WebGUI Hidden Pages for RD develop using
- [New Feature] Remove the Telnet Daemon will be activated about 5 seconds when the Device is booting
- [New Feature] Remove the hidden FTP server
- [Bug Fix] Fixed the live stream can’t display when using the https connection
- [Bug Fix] Fixed bad audio streaming on 3G internet access
Firmware: 1.03b08 - Date: 05/16/2012
- [New Feature] Support Daylight Saving function
- [New Feature] Support Korea language
- [New Feature] Support Digest Authentication
- [New Feature] Change new Web server
- [New Feature] Support language selection under live view page
- [New Feature] Some Web UI English text wording change
- [New Feature] Upgrade new mydlink agent to v2.0.15-b9
Firmware: 1.02b04 - Date: 11/07/2011
- [Bug Fix] Fixed Russia Time Zones problem
- [Bug Fix] Fixed PCHome e-mail account issue – e-mail cannot transfer to receiver
Firmware: 1.02b03 - Date: 10/14/2011
- [New Feature] Upgrade mydlink agent to 2.0.09-201110141349
Firmware: 1.02b02 - Date: 9/28/2011
- [New Feature] Upgrade mydlink agent to 2.0.08-201108261817
- [Bug Fix] Fixed Fritz!Box WPA/WPA2 auto mode, wireless cannot link issue
- [Bug Fix] Change default timezone to GMT-12:00
- [Bug Fix] Disable TCP/IP when upgrde F/W from mydlink portal
- [Bug Fix] Fixed audio pop sound issue
Firmware: 1.01b03 - Date: 5/31/2011
- [New Feature] Support Mac Bonjour Discover Service – Provide the Bonjour On/Off Setting and Bonjour Name Setting
- [New Feature] Support APIPA (Automatic Private IP Addressing) used in Bonjour Discover Service when the camera can’t use DHCP to obtain an IP address
- [New Feature] Upgrade bootcode to version v1.11 (2011-5-31)
- [New Feature] Upgrade mydlink agent to 2.0.05-201104261737
- [Bug Fix] Under wireless is disabled, wireless will be enabled after wireless site survey
- [Bug Fix] Change video resolution may cause system hang if someone is live viewing
- [Bug Fix] Fixed download firmware crash issue – this occur when FTP upload is enabled and have a bad FTP server address setting
- [Bug Fix] Add “GoAhead WebServer logo” logo on the bottom-right of the home page
- [Bug Fix] Add some functions for production test
- [Bug Fix] Change copyright year to 2010-2011
- [Bug Fix] Fixed some web pages wording error
- [Bug Fix] Fixed the Activate List only displays one user information if you disable [User Access Control] first and there are multiple user accounts to access the camera live video. (DBG10110213)
Firmware: 1.00b07 - Date: 12/20/2010
- [Bug Fix] Fixed email to Facebook compatibility problem
- [Bug Fix] New ActiveX v2.3.2.22 (2010-12-14) -> Fixed ActiveX zoom not locate at central area
- [Bug Fix] Improve production test issue
- [Bug Fix] Fixed Web UI wording error
Firmware: 1.00b06 - Date: 211/30/2010
- [Bug Fix] New ActiveX v2.3.2.21 (2010-11-30) -> Fixed Browser screen enlarge issue
- [Bug Fix] Fixed Night Mode On/Off not work issue on IE/ActiveX live view
Firmware: 1.00b05 - Date: 11/19/2010
- [Bug Fix] Web UI support new language – German, French, Italian, Spanish
- [Bug Fix] Update new ActiveX module (2.3.2.20) with new digital signature
- [Bug Fix] Fixed some Web UI wording error
- [Bug Fix] Fixed firmware upgrade may crash issue – user plug in/out LAN cable when system is upgrading firmware
- [Bug Fix] Fixed OSD time display problem – 00:xx:xx AM/PM fixed to 12:xx:xx AM/PM
- [Bug Fix] Fixed CGI interface (audiocfg.cgi) reply incorrect message problem
- [Bug Fix] Fixed Web UI display active user with incorrect user name
- [Bug Fix] Fixed Java module cannot reconnect audio session if audio session disconnected
- [Bug Fix] Fixed Web UI reply empty error message on save wireless page
Firmware: 1.00b04 - Date: 10/28/2010
- [Bug Fix] Fixed fast resolution change and language setting for production test
- [Bug Fix] Limit input characters of camera name to printable ascii characters (but space, “, ‘, &, <, and > are not allowed special characters)
- [Bug Fix] 3. Fixed some Web UI wording error
Firmware: 1.00b03 - Date: 10/22/2010
- [Bug Fix] Fixed https Web UI (Firmware Upgrade and Restore Configuration File) not work issue
- [Bug Fix] Change NTP time sync from 10 minutes to 24 hours
- [Bug Fix] Change Restore Configuration File response message and add count down timer to reconnect
- [Bug Fix] Support 3 language – English, Chinese (Simplified), Chinese (Traditional)
Firmware: 1.00b02 - Date: 10/08/2010
- [Bug Fix] Removed Location item on email content
Firmware: 1.00b01 - Date: 09/30/2010
DCS-932L - Rev B
Firmware: 2.01b03 - Date: 2/6/2015
- [New Feature] Upgrade mydlink agent to 2.0.18-b61
- [New Feature] Remove SSL, change to support TLS
Firmware: 2.00b06 - Date: 07/02/2014