D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: Energata on March 14, 2010, 10:33:39 PM
-
Basically, bypassing the router and direct connecting the DNS-323 via cat5 cable to the computer itself. Anyone do this? I had it running for a little while, however it is acting quite weird now. The only thing I changed was activated "network discovery" and IPv6 for my wireless controller that has internet access. My LAN is just the NAS connected to the system.
Easy Search Utility sometimes finds it...sometimes not (mostly not...). Web admin does not work either.
-
If you configure the DNS-323 for a static IP address, you should be able to reliably find it with a direct connection.
-
You may or may not require a crossover cable. According to fordem, gigabit devices do not require them.
Regards,
Wiggs,
-
You may or may not require a crossover cable. According to fordem, gigabit devices do not require them.
Regards,
Wiggs,
I believe what I said was most gigabit devices, and since I have personally connected my DNS-323 directly with a straight through cable, I can state that the DNS-323 does not require a crossover cable. It will require static ip addressing or you can enable the DNS-323's DHCP server.
Personally, I see no advantage to connecting a NAS to a single system, especially one like the DNS-323 - if what you're looking for is an external drive, go with USB or firewire, it'll probably be less expensive and it'll definitely be faster, and yes dual bay, BYOD, RAID USB enclosures do exist.
-
The whole point of the DNS-323 NAS is the fact that it's a NAS. :) I agree, there's no point in a direct connection. I'd select eSATA, Firewire or USB in that order for performance if I wanted a direct connect.
-
Thanks for the responses.
I'm not disputing the fact the a NAS is made specifically to exist on a network rather than accessible by a single machine only through direct connection...my choice is to set it up this way temporarily.
Rather, I'm trying to get to the bottom of why all of a sudden it is not accessible all of a sudden from my machine. Some setting somewhere is screwing it up...
-
For a stand-alone configuration, probably the easiest is to configure the DNS-323 DHCP server so your configuration on the computer doesn't change.
-
Energata,
Did you try toggling the LLTD setting on the NAS?
-
LLTD has nothing to do with actually networking it, it's just to produce the Eye Candy network map for Vista or Windows 7.
-
You are 100% right gunrunner.
Energata
My next suggestion would be to disable the wireless connection temporarily and see if there is a difference. It can narrow down the issue.
-
Question - do you have different ip address schema on the wired & wireless cards?