D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-2230 => Topic started by: Minglarn on October 27, 2012, 07:18:46 AM

Title: event logs flooding!
Post by: Minglarn on October 27, 2012, 07:18:46 AM
Hi! My first post!  :)

I bought my self a DCS-2230 and love the resolution and easyniess, but it's flooding my NAS with files named like this: "evt_20121027_160043003.log"  containing this text: "Event : Motion detected
"
The DCS is recording to my NAS (DNS-323) and its working well but per recorded file it floods my folder with 5 or 9 log files! What have gone wrong?!
Title: Re: event logs flooding!
Post by: Joe Public on October 28, 2012, 02:58:29 PM
Hi! My first post!  :)

I bought my self a DCS-2230 and love the resolution and easyniess, but it's flooding my NAS with files named like this: "evt_20121027_160043003.log"  containing this text: "Event : Motion detected
"
The DCS is recording to my NAS (DNS-323) and its working well but per recorded file it floods my folder with 5 or 9 log files! What have gone wrong?!

Have you updated the firmware to latest one (1.10)?

I forced the DCS-2230 to write a log file onto NAS, choosing "Log" inside "Event" window. So if you don't want the log file, simply uncheck the option "Log" inside the Event options.
Title: Re: event logs flooding!
Post by: Minglarn on October 28, 2012, 11:17:34 PM
I've the latest FW1.10 ... And were did you find the "Log" option in Events window? There is no option called "Log" in my "Events" .

EDIT: Anyone else having these event log files created?
Title: Re: event logs flooding!
Post by: Minglarn on November 02, 2012, 03:03:01 PM
Hum.. nearly 300 views but only 1 has replied..  :(

Anyhow, did some testing and found out that if you set the value to 0 sec for "Delay for X seconds before detecting next event [For motion detection and digital input and Passive Infrared sensor" in the EVENT settings it floods you with event logs... But IF you set it to 18sec (the amount of time your recordings lasts) there will be no event log files written!

Think i might found a bug here as there is no place in EVENT set up page where you can set it to write a .log file ..
Title: Re: event logs flooding!
Post by: JonasQ on November 05, 2012, 04:29:20 AM
Thanks for the info Minglarn, very useful!  :)
Title: Re: event logs flooding!
Post by: macutan on June 13, 2013, 10:30:51 PM
very useful, I have just bought and installed a DCS-6010L and I am surprised this log issue has  not been fixed (i would love to see a checkbox to disable the sending/writting of these log files). Thx
Title: Re: event logs flooding!
Post by: belvedere on October 28, 2013, 09:46:49 PM
For what it's worth, I have a DCS-2230 that's doing the same thing to me via e-mail.  I do have the delay before re-trigger set to 1 second, which should be adequate.  For every e-mail that contains snapshots, I get five that have one-line .log files attached.  Pretty irritating.  I'm using firmware 1.20.

I was able to block the .log files in my mail client by using Apple Mail's rules feature, where I can delete any messages whose attachments have .log in the name.  No idea why I'm getting these in the first place, though, and I can't see in the configuration text where it might be set up.
Title: Re: event logs flooding!
Post by: bdcollery on November 19, 2013, 01:38:03 PM
I was researching this same issue and found this post.

Definitely would like to see an option to disable all .log file from being sent as email attachements!

Title: Re: event logs flooding!
Post by: belvedere on December 10, 2013, 07:31:09 AM
I had the same issue and received the same suggestion from D-Link support.  Basically, if you set the retrigger interval less than the length of the recording (or number of 1-second snapshots), you'll get those emails.
Title: Re: event logs flooding!
Post by: tqyydn on February 07, 2014, 11:18:00 PM
Face the same problem with my DCS-2310L. My solution is by creating a filter in the email to delete those event log emails
Title: Re: event logs flooding!
Post by: 4runner on April 20, 2014, 07:56:55 PM
Yeah... many thanks for this info.

Setting the time delay to the same as my recording time solved my problem of multiple evt.logs

Does anyone know how to also disable the .jpg file that accompanies every .avi file written to the SD card. I can't find anywhere that I have requested a .jpg on motion detection.

Thanks
Title: Re: event logs flooding!
Post by: fyc95 on July 01, 2014, 10:37:18 AM
it's flooding my ftp server.......
is there an option to disable it? maybe by sysenv.dat?
Title: Re: event logs flooding!
Post by: belvedere on July 25, 2014, 12:54:37 PM
Does anyone know how to also disable the .jpg file that accompanies every .avi file written to the SD card. I can't find anywhere that I have requested a .jpg on motion detection.

I don't think it's possible to disable that.