• April 27, 2024, 05:09:20 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 ... 4 5 [6]

Author Topic: feedback for beta firmware 1.32b09NA  (Read 45128 times)

Flak

  • Level 1 Member
  • *
  • Posts: 5
Re: feedback for beta firmware 1.32b09NA
« Reply #75 on: January 01, 2010, 03:14:58 PM »

Mine had been fine since I updated it on the day the beta was released.  However, yesterday I had to make a config change, the first one since I setup it up and did the config the day I flashed it to the beta firmware.  I went in made my change/addition.  Router said it had to reboot.  Let it reboot and now I'm back to my problem where nothing in the advanced tab saves and all settings in the advanced tab were reset.

I've reset the router and reflashed, if I setup everything directly after the flash it's fine.  But if I wait a couple hours and go in and make a change the problem occurs again.
Logged

PeterJvM

  • Level 2 Member
  • **
  • Posts: 61
Re: feedback for beta firmware 1.32b09NA
« Reply #76 on: January 03, 2010, 04:01:45 AM »

Does this actually mean that they ship "new routers"(that are on the market for such a long time) with beta firmware installed? ???
 

they are shipping them with 1.32na. i just got one and have been frustrated since i turned it on...
Logged
Peter

DIR-655 ( H/W: A2 ) ( FW: 1.21b05beta )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
Intel 3945ABG ( H/W: REV 02 ) ( FW: 11.5.0.32 )

point

  • Level 2 Member
  • **
  • Posts: 47
Re: feedback for beta firmware 1.32b09NA
« Reply #77 on: January 03, 2010, 04:05:39 AM »

Does this actually mean that they ship "new routers"(that are on the market for such a long time) with beta firmware installed? ???
 

No, 1.32na is a final firmware.
Logged

PeterJvM

  • Level 2 Member
  • **
  • Posts: 61
Re: feedback for beta firmware 1.32b09NA
« Reply #78 on: January 03, 2010, 04:07:45 AM »

Ok, tnx, I must have missed the final one in between all those beta's ;D

No, 1.32na is a final firmware.
Logged
Peter

DIR-655 ( H/W: A2 ) ( FW: 1.21b05beta )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
Intel 3945ABG ( H/W: REV 02 ) ( FW: 11.5.0.32 )

point

  • Level 2 Member
  • **
  • Posts: 47
Re: feedback for beta firmware 1.32b09NA
« Reply #79 on: January 03, 2010, 07:31:10 AM »

Ok, tnx, I must have missed the final one in between all those beta's ;D


Thi final one was released before those betas (b04 and b09).

The betas were released to correct the 1.32na final issues....  ::)

b04 is supose to correct the shareport issue, and b09 the dns relay issue. (don't know why they don't release a new beta build with the two issues solved...)
Logged

PeterJvM

  • Level 2 Member
  • **
  • Posts: 61
Re: feedback for beta firmware 1.32b09NA
« Reply #80 on: January 03, 2010, 12:07:05 PM »

Do I stand corrected?
All the beta I'm talking about starts with 1.32na
They all say they solve issues that, according to posts in this forum, still exist to some matter.
It's f&/+&%+ quite clear that actual buy-ers are user as beta-testers.
NOT EVEN MICROSOFT GOES THIS FAR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >:(
DE-Link is not to be considered as a serious hardware supplier anymore, in my opinion.

Thi final one was released before those betas (b04 and b09).

The betas were released to correct the 1.32na final issues....  ::)

b04 is supose to correct the shareport issue, and b09 the dns relay issue. (don't know why they don't release a new beta build with the two issues solved...)
Logged
Peter

DIR-655 ( H/W: A2 ) ( FW: 1.21b05beta )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
Intel 3945ABG ( H/W: REV 02 ) ( FW: 11.5.0.32 )

PeterJvM

  • Level 2 Member
  • **
  • Posts: 61
Re: feedback for beta firmware 1.32b09NA
« Reply #81 on: January 03, 2010, 12:13:09 PM »

By the way, I just got a warning in red text that this may get me kicked out! ;D ;D ;D ;D ;D ;D ;D ;D

Do I stand corrected?
All the beta I'm talking about starts with 1.32na
They all say they solve issues that, according to posts in this forum, still exist to some matter.
It's f&/+&%+ quite clear that actual buy-ers are user as beta-testers.
NOT EVEN MICROSOFT GOES THIS FAR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >:(
DE-Link is not to be considered as a serious hardware supplier anymore, in my opinion.

Logged
Peter

DIR-655 ( H/W: A2 ) ( FW: 1.21b05beta )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
DWA-140 ( H/W: B1 ) ( FW: 0.20 DRV: Ralink 2.3.7.0 )
Intel 3945ABG ( H/W: REV 02 ) ( FW: 11.5.0.32 )

point

  • Level 2 Member
  • **
  • Posts: 47
Re: feedback for beta firmware 1.32b09NA
« Reply #82 on: January 03, 2010, 12:15:12 PM »

Do I stand corrected?
All the beta I'm talking about starts with 1.32na
They all say they solve issues that, according to posts in this forum, still exist to some matter.
It's f&/+&%+ quite clear that actual buy-ers are user as beta-testers.
NOT EVEN MICROSOFT GOES THIS FAR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >:(
DE-Link is not to be considered as a serious hardware supplier anymore, in my opinion.


why? because they released a final version with some bugs? s*** happens everywhere.

The routers are being shiped with a production firmware. Not a test one.

The error here is calling those betas 1.32... they should call them 1.33, since they where released to fix bugs of the 1.32 final.
Logged
Pages: 1 ... 4 5 [6]