• April 25, 2024, 09:36:59 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How to connect LinkSys wps54gug, a remote wireless G print server?  (Read 2238 times)

jervolpe

  • Level 1 Member
  • *
  • Posts: 1
How to connect LinkSys wps54gug, a remote wireless G print server?
« on: April 12, 2011, 05:57:38 PM »
My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption?

Can the DIR-655 support a mixed N and G network?

Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?

I've been retired from IT for about six years now and just not familiar enough with this technology, so an assist would be greatly appreciated.

Jerry
Logged

davevt31

  • Level 9 Member
  • ****
  • Posts: 1591
Re: How to connect LinkSys wps54gug, a remote wireless G print server?
« Reply #1 on: April 12, 2011, 09:39:16 PM »
You can have mixed G and N,  check the manual for the print server to see if you can use WPA/WPA2 with it. The 655 support mixed networks, you only have to change to WEP if the print server doesn't support WPA.
Logged