D-Link DSL Modem/Routers > DSL-2740B

2740 and 2680 bridge mode

(1/2) > >>

Fester76:
Hi guys, this is my first topic.
I am trying to duplicate my network on the second floor.
Using 2740 as primary and 2640b as AP. Everything seems to work quite fine, but often the devices do not switch from one to the other in areas where both wifi ssid are present with the result of slow navigation.
I read you guide at http://forums.dlink.com/index.php?topic=59005.0 and understood that I need to set the Mac address of both, one into the other. The problem is that the page at wlwds.cmd seems to be not responding on both. I do access to it but once inserted the mac address the save/apply button does not save/apply the change.

Any suggestions
Thanks

FurryNutz:
Link>Welcome!


* What Hardware version is your modem? Look at the sticker under modem.
* Link>What Firmware version is currently loaded? Found on the modems web page under status.
* What region are you located?
PC 3rd Party Security Software Configurations

* Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
PC Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.

Fester76:
Hi, I am writing from Italy.

2740b hdversion c2 firm eu_3.03
2640b hdversion b2 firm eu_4.00

Thanks

FurryNutz:
Let us know if trying a different browser works...
If it doesn't, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.

Fester76:
No way..... Even with other browser....where can i find the phone number?
Thanks

Navigation

[0] Message Index

[#] Next page