• March 28, 2024, 09:41:36 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-825L Firmware 3% and then shutdown  (Read 10141 times)

RonR

  • Level 1 Member
  • *
  • Posts: 4
DCS-825L Firmware 3% and then shutdown
« on: April 01, 2017, 05:17:26 PM »

Camera worked for local login but could not setup a D'link account for remote access, decided to try firmware upgrade

Windows 7 PC
Downloaded lastest Zip for this model
Logged into camera using its local IP address, user admin, P/W what I had setup
Got the web interface, selected the unzipped 1.08 .bin file and then Upload
Took a few seconds and saw 1% then 2% then 3% then..............nothing didn't freeze % just went away, no Blue iCloud light on the camera anymore just red power light
I left if for an hour but with no Blue wifi light I figured it was done, as in toast

Sure enough it is not showing up on Router or Fing

I tried the unpower then power up holding down reset button for 10-15 seconds, it starts to flash red power light then after I release reset it goes to Green power light but still no Blue wifi light
Holding down reset button while camera is on doesn't change Green light to Red so not resetting

I read about some WiFi only D'link cameras being able to reload Firmware from MicroSD card
So I cleared an SD card, added a Folder called upgrade
Put the firmware in the folder and named it update it is a .bin file

Tried it and still no joy

No blue light

Anything I have missed?

Camera is no longer supported unless I pay the $30 for one time issue, camera has been good and will get a dlink again but the $30 is 25% of new camera so............
 




Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-825L Firmware 3% and then shutdown
« Reply #1 on: April 03, 2017, 06:29:52 AM »

Link>Welcome!

  • What region are you located?

What browser are you using?
Any PC security software or plugins enabled?

Try FF or IE11
PC 3rd Party Security Software Configurations
  • Turn off all anti virus and firewall programs on PC while testing.

    Try this to see if it will recover:
    Emergency Recovery Mode
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

RonR

  • Level 1 Member
  • *
  • Posts: 4
Re: DCS-825L Firmware 3% and then shutdown
« Reply #2 on: April 03, 2017, 09:51:57 AM »

Thank you for the welcome

I was using Firefox browser
AVG(anti-virus) was off

Never got any popups indicating an "intrusion detected"

Since this camera has WiFi only, no hard wire connection, I can no longer "talk" to it because I assume the partial firmware update disable the WiFi in the camera, no blue light coming on.

I tried using the microSD card method to recover camera, as described for other WiFi only cameras but doesn't seem to work on this model

Is there a different folder name or .bin name I should try on the SD card?
maybe this model is looking for another "name" for firmware update via SD card

Or can the USB power port be used to upload firmware?



 
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-825L Firmware 3% and then shutdown
« Reply #3 on: April 03, 2017, 09:53:46 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

RonR

  • Level 1 Member
  • *
  • Posts: 4
Re: DCS-825L Firmware 3% and then shutdown
« Reply #4 on: April 04, 2017, 11:17:52 AM »

I did call, this model no longer has free support, so I need to pay the $30 for one time issue, which they said may or may not solved the problem, lol, at least they were honest about it :)
Original problem was I could not setup d'link account to view camera off-site, could view it on-site, local LAN
So I decide to try firmware update
and.................

We are here

Similar new model runs $120-$140 so the $30 I think will be better spent going that way since even if I did fix it I would have still have an older unsupported camera

Thank you for the time
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-825L Firmware 3% and then shutdown
« Reply #5 on: April 04, 2017, 01:31:45 PM »

Well if they can't seem to get it fixed, may be worth an RMA if they deem it bad and unrecoverable.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.