D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-825L => Topic started by: francorg on January 28, 2014, 02:31:46 AM
-
I found the following configuration web pages on my DCS-825L.
To access them you have to use:
user = admin
password = the password of your webcam, usually configured during first time setup wizard
1. http://ip_address/eng/liveView.cgi or http://ip_address/eng/mainFrame.cgi
Here you can access the typical DLink web config page with several sections:
- a liveview page which requires the CamCliCtrl (InstallCamCliCtrl.msi) which is missing and I couldn't find a way to make it working (tried on IE10 and Chrome 33)
- a setup page where you can config the wireless lan setup and also access to the SD storage
- a maintenance page where to upgrade the firmware
- a status page with the typical info (ip address, mac address, etc.)
- a help page containing some disclaimers
2. http://ip_address/eng/admin/
here you can access two configs:
- internet connection wizard or manual setup
- motion detection wizard or manual setup this one doesn't work as I cannot enable the CamCliCtrl plugin, as explained in point 1. above
3. http://ip_address/image/jpeg.cgi
here you get a screenshot of the actual webcam view
4. http://ip_address/video/mjpg.cgi
here you get a live stream of your webcam. To access I use VLC player, by opening a Network Stream and putting in the url above.
I succeeded also in forwarding a port on my firewall in order to have direct access to the url above also when I am not at home by pointing to the public ip address of my home internet connection.
I think that every URL above it's also accessible through https protocol on standard port 443.
For the moment this is all I discovered.
If you have further info please contribute to this post.
Roberto
-
Very nice ! The mainFrame.cgi seems to be the usual DLink Web interface but it is missing some of the settings that are available in the other screens. Hopefully this is because they are working on integrating them and it will be announced in a later firmware ?
-
- a liveview page which requires the CamCliCtrl (InstallCamCliCtrl.msi) which is missing and I couldn't find a way to make it working (tried on IE10 and Chrome 33)
Roberto
hi francorg,
I find this file but its also not working for me, maybe its a to old version. >:(
InstallCamCliCtrl.msi (http://www.mediafire.com/download/mo57ei32kt139b4/InstallCamCliCtrl.rar)
rose05
-
CamCliCtrl not working for me either....
-
Thanks Francorg, I'm experiencing the same issue with the NCS plugin in all browsers.. Hope a future firmware release might fix it.
Some additional useful URLs:
5. rtsp://admin:passwd@ipaddr:554/play1.sdp ~ 720p 25fps
6. rtsp://admin:passwd@ipaddr:554/play2.sdp ~ 360p 10fps
7. rtsp://admin:passwd@ipaddr:554/play3.sdp ~ 360p 10fps
These are available to view an ffMPEG live stream with audio using RTSP (http://en.wikipedia.org/wiki/Real_Time_Streaming_Protocol) (H.264/MPEG4 (http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC) encoding).
Achieved successful playback of these streams over TCP or UDP using various methods:
- RTSP Player (Android) (https://play.google.com/store/apps/details?id=org.rtspplr.app)
- VLC Media Player (Linux, Mac, Windows) (http://www.videolan.org/vlc/index.html)
- iSpy as ffMPEG source (Windows) (http://www.ispyconnect.com/)
Advanced URLs:
8. http://ipaddr/cgi/admin/tools_admin.cgi
Returns XML of config settings (incl. your admin password in plaintext!) - seems there will be scope to enable multiple users in future.
9. http://ipaddr/cgi/admin/telnetd.cgi?command=on
Does anyone know the login/password to login to the Linux Telnet console (e.g. using PuTTY (http://www.chiark.greenend.org.uk/~sgtatham/putty/)) after running this command in your browser?
-
Hi guys, I just bought a 933L and 825L.
I made some experiment with 825L.
I'm using IP Cam for live view and searching with it the 825L is founded like DCS 1130.
In this 3d http://forums.dlink.com/index.php?topic=50579.0 I test the DCS 1130 emulator looking the url.
for example:
http://support.dlink.com/emulators/dcs1130/recorder.html
In my network i change with the ip address and html with cgi and it works:
ipaddr/recorder.cgi
fod ddns adv_ddns.html became ipaddr/adv_ddns.cgi
I hope that can help.
Bye
(sorry for my english)
-
Thank you CF76!
Great discovery!!
On my webcam it works by using this type of url: http://ip_address/eng/admin/recorder.cgi
Roberto
-
A couple more pages I have found:
http://ipaddr/eng/admin/support_tools.cgi - List of possible settings and what they mean? No selectable settings though..
http://ipaddr/eng/admin/tools_admin.cgi - Change admiin password, add user accounts, authentication, device settings (on screen display, turn led on, off, flicker?)
http://ipaddr/eng/admin/tools_system.cgi - Time configuration, automatic time configuration, set time manually. (Note this is what set me down this path of looking for pages as my time was always incorrect no matter if I selected synchronize in the app. Thie issue was because the setting in here was setting the time to automatically use a dlink server?!) Unchecked automatic synch, selected my timezione, and clicked save and it took about a minute for the settings to be saved to my camera... it works!
http://ipaddr/eng/admin/st_log.cgi - xml info? under construction?
http://ipaddr/eng/admin/adv_lan.cgi - Port Settings, Port Forwarding
http://ipaddr/eng/admin/adv_wireless.cgi - Enable AP Client?
http://ipaddr/eng/admin/adv_image.cgi - Shows a live video stream with image settings!
http://ipaddr/eng/admin/adv_snapshot_cont.cgi - Snapshot (email snapshots on motion detection?)
http://ipaddr/eng/admin/tools_default.cgi - save to local hard drive, factory reset, reboot
-
Hi everybody!
One more page I have found:
http://ipaddr/eng/admin/adv_record.cgi
Why D-link doesn't make a single page for the configuration of this camera, aka "http://ipaddr".
And the iPhone/iPad app is so slughish, D-link needs to redesign this ios app.
Funny is, i just love this camera, and i use it for monitoring my cats! But it needs more and more improvements.....
-
one more page:
ipaddr/eng/admin/support_men.cgi
is the help page, see the Music Player menu!!! you can upload your own music.
We MUST find this page.
bye
-
Hi! Everybody...
I corrected my last post!
I still can't upload musics to the SD card? Even using the http://ipaddr/eng/admin/support_men.cgi
I never see a option to upload musics to the SD.
Someone help me!
Thanks...
-
Once you enable the telnet options with...
http://192.168.0.11/cgi/admin/telnetd.cgi?command=on
You can login to the system with
U/N : root
P/W : admin
-
Once you enable the telnet options with...
http://192.168.0.11/cgi/admin/telnetd.cgi?command=on
You can login to the system with
U/N : root
P/W : admin
It doesn't work on mine with the latest firmware.
Does it work for you? Can you send a dir command and retrieve all the cgi file names?
Roberto
-
Hi Roberto,
I haven't upgraded to the newer firmware just yet.
Here is what I get when I request 'help' with telnet.
BusyBox v1.20.2 (2013-09-24 23:39:31 MAGT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
# help
Built-in commands:
------------------
. : alias bg break cd chdir continue echo eval exec exit export
false fg hash help jobs kill let local printf pwd read readonly
return set shift times trap true type ulimit umask unalias unset
wait
#
-
If you send the command "ls" (LS lowercase without quotes) does it return the file list?
Roberto
-
BusyBox v1.20.2 (2013-09-24 23:39:31 MAGT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
# ls
bin dvr init mnt proc starkit tmp var
dev etc lib opt sbin sys usr
Dont know which folder the cgi files would be located in...
Not great on TELNET :(
-
Just done a little bit of playing and googling and found this...
Hope this helps everyone...
If you want more let me know! ;D
# ls var/www/eng
admin liveView.cgi mainFrame.cgi
basic.css liveView.css mainFrame.css
frame.lang liveView.xsl mainFrame.lang
fullScreen.html liveView_debug.cgi mainFrame.xsl
home-left.lang liveView_debug.xsl mainFrame_debug.cgi
icons.css liveview.lang mainFrame_debug.xsl
images logout.cgi music_control.cgi
index.html logout.lang setup.css
js logout.xsl web_event.cgi
# ls var/www/eng/admin
adv_apRouter.lang logout.cgi
adv_apRouter.xsl logout.lang
adv_audio_detection.cgi mfg.cgi
adv_audio_detection.lang motWizard.cgi
adv_audio_detection.xsl motWizard.lang
adv_audiovideo.cgi motWizard.xsl
adv_audiovideo.lang mot_detect.cgi
adv_audiovideo.xsl mot_detect.lang
adv_ddns.cgi mot_detect.xsl
adv_ddns.lang music_button.cgi
adv_ddns.xsl music_button.lang
adv_do.cgi music_button.xsl
adv_do.lang netWizard.cgi
adv_do.xsl netWizard.lang
adv_firewall.cgi netWizard.xsl
adv_firewall.lang night_led.cgi
adv_firewall.xsl night_led.lang
adv_godev.cgi night_led.xsl
adv_https.cgi pppoe_status.cgi
adv_https.lang product_registration.cgi
adv_https.xsl reboot.cgi
adv_image.cgi recorder.cgi
adv_image.lang reset.cgi
adv_image.xsl rs485.lang
adv_lan.cgi schedule_profile_manager.cgi
adv_network.lang sdcard
adv_network.xsl siteSurvey.cgi
adv_privacy_mask.cgi st_device.cgi
adv_record.cgi st_device.lang
adv_recording.lang st_device.xsl
adv_recording.xsl st_log.cgi
adv_sdcard.cgi status-left.lang
adv_sdcard.lang support-left.lang
adv_sdcard.xsl support_ack.cgi
adv_snapshot.cgi support_ack.lang
adv_snapshot.lang support_ack.xsl
adv_snapshot.xsl support_acknowledge.xsl
adv_snapshot_cont.cgi support_adv.cgi
adv_videoclip.cgi support_adv.lang
adv_videoclip.lang support_adv.xsl
adv_videoclip.xsl support_home.cgi
adv_wireless.cgi support_home.lang
adv_wireless.lang support_home.xsl
adv_wireless.xsl support_men.cgi
adv_wizard.cgi support_men.lang
adv_wizard.lang support_men.xsl
adv_wizard.xsl support_status.cgi
advanced-left.lang support_status.lang
alarm_out_action.cgi support_status.xsl
apSiteSurvey.cgi support_tools.cgi
ap_client.cgi support_tools.lang
ap_router.cgi support_tools.xsl
audio_player.cgi telnetd.cgi
audio_player.lang test_ftp_status.cgi
audio_player.xsl test_mail_status.cgi
calibration.cgi thermal_detection.cgi
cam_control.lang thermal_detection.lang
cam_control.xsl thermal_detection.xsl
cam_patrol_control.lang tools-left.lang
cam_patrol_control.xsl tools_admin.cgi
cert_create.cgi tools_admin.lang
cert_create_request.cgi tools_admin.xsl
cert_property.cgi tools_default.cgi
cert_property.lang tools_default.lang
cert_property.xsl tools_default.xsl
cert_remove.cgi tools_firmware.cgi
cert_request_info.cgi tools_firmware.lang
cert_upload.cgi tools_firmware.xsl
cloudLink.cgi tools_leveloftrust.cgi
cloudStatus.cgi tools_system.cgi
config.lang tools_system.lang
ddns_status.cgi tools_system.xsl
export.cgi tvaview.xsl
export_log.cgi tvjview.xsl
factoryUpdate.cgi update.cgi
forceUpdate.cgi update_status.cgi
frame.lang uploadAudio.cgi
getSDFile.cgi web_log.cgi
go_sleep.cgi web_log.lang
import.cgi web_log.xsl
index.cgi wireless_ate.cgi
loadfile.cgi
-
here is the url for music playing...
http://ipadd/eng/admin/music_button.cgi
-
This is also replated to playing your own audio files...
http://ipadd/eng/admin/audio_player.cgi
-
Here is the page that will list most of the features that everyone will be looking for...
http://ipaddr/eng/liveView_debug.cgi
-
I love more and more this camera, Many thanks, friggingreat.....
p.s ( I can't use the botons #1....#5, to play the uploaded musics, they have to be .mp3, but is there a max bit rate?)
Best regards,
-
Upload the files on the audio player page and when you go to the music player page select SD card music and save, this will now be the default music when you press the music note on the camera.
Alternatly you can play the individual files once you have uploaded them on the audio player page.
As for the MP3 files it gives a warning if the file has space's in and I have been using high quality MP3's 320kbps.
-
Many thanks, friggingreat.....
Still no sucess.
First i upload with sucess my musics.
Then, the problem, on the "music player" page i save the "sd card" option (to use my musics on the SD), and then when i go to the "audio player" page there are only 5 music listed and when i press the play button, i listen to the lulaby music.
More curious is, on that same page, if i press the "01.mp3" music, it tryes to download, and indeed that's the music i uploaded, not the lulaby.
Then when i return to the "music player" page it's not the "sd card" selected but the "system music" selected, so this page is not saving properly. Oh well i will wait for the next firmware (i am using the most recente), maybe ti's fixed. sorry for my bad English.
Best Regards,
Ferdu-42
-
After i set the Static IP Address and Port Forwarding, the d'link cloud services is disabled
someone know how can i have the d'link cloud services and Static IP Address +port forwarding in the same time?
any one can help me?
Thank thanks~
-
I just did a recursive directory listing using telnet on the camera (1.03) to fetch all files. I have created a more complete list of files that can be executed with a browser. Hopefully there is something useful here that hasn't been noticed yet. Here's a link:
http://veerman.ca/other/dlink/ (http://veerman.ca/other/dlink/)
Edit: I made a simple script that takes your IP and will auto-generate links for faster testing.
-
I just did a recursive directory listing using telnet on the camera (1.03) to fetch all files. I have created a more complete list of files that can be executed with a browser. Hopefully there is something useful here that hasn't been noticed yet. Here's a link:
http://veerman.ca/other/dlink/ (http://veerman.ca/other/dlink/)
Edit: I made a simple script that takes your IP and will auto-generate links for faster testing.
Great!
Thank you,
Roberto
-
After i set the Static IP Address and Port Forwarding, the d'link cloud services is disabled
someone know how can i have the d'link cloud services and Static IP Address +port forwarding in the same time?
any one can help me?
Thank thanks~
In network settings you might have forgotten to manually define a DNS server and because of this the camera can't resolve the hostname to the IP address. Do that and it will work again. Good luck.
-
It doesn't work on mine with the latest firmware.
Does it work for you? Can you send a dir command and retrieve all the cgi file names?
Roberto
I just upgraded to 1.03. You can log in to the DCS-825L with root and the admin password you have set with the install wizard.
-
Many thanks, friggingreat.....
Still no sucess.
First i upload with sucess my musics.
Then, the problem, on the "music player" page i save the "sd card" option (to use my musics on the SD), and then when i go to the "audio player" page there are only 5 music listed and when i press the play button, i listen to the lulaby music.
More curious is, on that same page, if i press the "01.mp3" music, it tryes to download, and indeed that's the music i uploaded, not the lulaby.
Then when i return to the "music player" page it's not the "sd card" selected but the "system music" selected, so this page is not saving properly. Oh well i will wait for the next firmware (i am using the most recente), maybe ti's fixed. sorry for my bad English.
Best Regards,
Ferdu-42
I am having similar issues to you but slightly different. I can upload a mp3 file and it does go into the music folder on the sd card. I have used short file names i.e. 06.mp3, 07.mp3. If I use 05.mp3 I get the same issue as you had in that download of the file from ipaddr/eng/admin/audio_player.cgi gives me the one I uploaded but play gives me the original melody! Odd but it looks like the download url is always music/xx.mp3 so it picks the file from the sdcard folder rather than the built in file.
If I use this page
ipaddr/eng/admin/music_button.cgi?folderpath=&command=1&getSystemMusic=1&filesPerPage=5 and click on the SDCard music/ link I can pick a single track from the sd card to play when I press the music button on the camera itself. This works at least. If I go to ipaddr/music/sdcard_play.cgi I can force the play of the track assigned to the button from the browser as if I had pressed the physical button on the device.
If I modify the audio player url to
ipaddr/eng/admin/audio_player.cgi?folderpath=music&command=video&getSystemMusic=0&filesPerPage=5
I can see the files that I want to be able to play in the player screen but the play button does not work (delete does though). It looks like the javascript is not fully in place yet to cope with the folder structure. The function doThings(type, value) gets passed the action i.e. play and the filename but no folder name.
case 'play':
//alert("play music = "+value);
command = "play";
$("#folderName").val(value);
//folderpath = value;//need change
break;
sorry not fully conversant with javascript so can't get any further with this but looks like developers have put a remark in to say they need to do something to be able to cope with folders (possibly?).
-
Hi, i am new to the forum, i have a questin.
In the various menus, is there a way to disable the startup sound?
I have not found.
Thank
-
Many thanks for all information provided.. but I still need help to make the player works with SDCard music.
I already tired all the options described but without success. Basically, I can see the mp3 file (e.g 07.mp3) but no able to play.
Appreciate if somebody could provide more details about how make it works.
-
@gvascon1
Can you try to play your music through this screen:
http://ip_addr/eng/mainFrame_debug.cgi?nav=Setup#
Go there and check the Music Button menu item
I'm on the latest firmware and it works through this menu. I had to click Music/ next to SD Card. From there I was displayed a list of my .mp3s. I clicked save settings, and now my mp3s play and not the default lullabies.
-
Hi Guys
Anyone know if the motion detection is configurable?
I am trying to get the motion detection to send an event to my web server.
And then other question is the Temp Sensor, is there a URL I can get this?
Sorry I just got it yesterday, still finding out things..
Chris
-
Hi guys.
I need some help with a livestream on raspbmc.
Is there someone who knows how i can use raspbmc with the rtps-link?
-
Anyone worked out how to install the NCS plugin in 1.04 and get the live view working via http://192.168.1.10/eng/liveView.cgi
-
Every time I put the camera off and back on again the time had been reset.
In the setup I tried all kinds of settings (syncing and manually) but it seems that the time setting is erased when you put the camera off.
Pretty annoying...
-
What FW version is currently loaded?
What region are you located?
Every time I put the camera off and back on again the time had been reset.
In the setup I tried all kinds of settings (syncing and manually) but it seems that the time setting is erased when you put the camera off.
Pretty annoying...
-
I have the latest (1.04) Firmware installed.
I'm located in The Netherlands (of course I've set the right TimeZone).
Because of you questions I presume that the problem I have is not normal...
-
You might want to try a manual re-load of the FW using a LAN wired connection only. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.
Let us know if the settings are saved after a power cycle...
-
Hi! Everybody...
I corrected my last post!
I still can't upload musics to the SD card? Even using the http://ipaddr/eng/admin/support_men.cgi
I never see a option to upload musics to the SD.
Someone help me!
Thanks...
Hi all,
To upload music to the SD you need to umonunt the SD first and create a folder called "music" in the SD card (with a computer) and then put at most 5 MP3 named 1.mp3 to 5.mp3
Found the instructions on: ftp://ftp2.dlink.com/PRODUCTS/DCS-825L/REVA/DCS-825L_MP3_LULLABY_INSTALLATION_INSTRUCTIONS.PDF
Hope it helps! Thanks for all the other links! :)
-
on the new software 1.05.02 it seems doesnt have the mainFrame_debug.xsl so you didnt can load the main configuration page
-
I Have the same problem, when I turn off the babycam and then turn on the date & time are reset (I have this issue with FW ver 1, 2 and 4)
You said "re-load of the FW using a LAN wired connection only"; but how can I do it?; the baby cam DSC-825L haven't an Ethernet connection, only have Wifi.
Therefore I try to reload FW many times, and always date/time are reset.
Any other solution?
Thanks
You might want to try a manual re-load of the FW using a LAN wired connection only. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.
Let us know if the settings are saved after a power cycle...
-
You might want to try a manual re-load of the FW using the wireless connection. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.
Let us know if the settings are saved after a power cycle...
If this still fails and the problem still continues, then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. You may need to ask for an RMA. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
I Have the same problem, when I turn off the babycam and then turn on the date & time are reset (I have this issue with FW ver 1, 2 and 4)
You said "re-load of the FW using a LAN wired connection only"; but how can I do it?; the baby cam DSC-825L haven't an Ethernet connection, only have Wifi.
Therefore I try to reload FW many times, and always date/time are reset.
Any other solution?
Thanks
You might want to try a manual re-load of the FW using a LAN wired connection only. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.
Let us know if the settings are saved after a power cycle...
-
main menue with fw1.03 for all settings
(http://fs2.directupload.net/images/150510/sl4h9c4p.jpg)
(http://fs2.directupload.net/images/150510/euom5gyq.jpg)
-
Let us know what happens after reloading FW...
-
with FW 1.04 same Menue
(http://fs2.directupload.net/images/150511/793se3hi.jpg)
(http://fs2.directupload.net/images/150511/82tosy54.jpg)
-
Does the configuration remain after power cycling the camera?
-
hi FurryNutz
here after some power cycling the camera, they lost some of the setting! (Time, ...)
but not the main settings like Network.
(http://fs2.directupload.net/images/150511/awwltjtv.jpg)
Solution for me, I restore my settings.db then are all OK!
(http://fs1.directupload.net/images/150511/8jz26bzn.jpg)
firmware update 1.03 to 1.04
(http://fs1.directupload.net/images/150511/2w4rdje5.jpg)
music uploading
(http://fs2.directupload.net/images/150511/hyirthjh.jpg)
(http://fs2.directupload.net/images/150511/4dhlatlu.jpg)
all OK
(http://fs1.directupload.net/images/150511/56ejvyss.jpg)
-
Looks like a good work around. You may want to contact your regional D-Link support office and ask about this. Time should be accurate even upon a reboot or power cycle. Ensure you have NTP services selected and enabled for Time. This will help the unit keep accurate time values.
-
Just updated to firmware v1.06.06 as suggested by the prompt of the baby monitor iPhone app.
It seems that the liveView_debug.cgi doesn't exist anymore. It still exist liveView.cgi but it has just few options to configure.
Is anyone able to access the root folder of a v1.06 camera and check if then renamed/moved the liveView_debug.cgi file?
Thank you,
Roberto
-
Firmware Version
New Features
V1.06.06
1.Update mydlink agent to v2.0.19-b33
2.Add Bonjour_dcamera service and remove Bonjour _http service
3.Support UTF-8 Unicode format for SD card music playback
4.Redefine the recording file naming rule for multi-event recording feature and modify the related NIPCA sdcard_list and recorder CGI
have this days no time to check it and look "able to access the root folder of a v1.06", as soon I have time .. will post it here
regards
-
Hi everyone!
Has anybody found a way to access advanced configuration pages on firmware V1.06.06
From booth DCS-825L and DCS-855L dlink has removed this pages
Can i downgrade? where can i find the previous working .bin firmware files. they removed from ftp and website as well.
If anybody has the files please link them here.
Cheers,
Ed
-
Hi everyone!
Has anybody found a way to access advanced configuration pages on firmware V1.06.06
From booth DCS-825L and DCS-855L dlink has removed this pages
Can i downgrade? where can i find the previous working .bin firmware files. they removed from ftp and website as well.
If anybody has the files please link them here.
Cheers,
Ed
1. downgrad possible? : YES
2. firmware to find? : http://tsd.dlink.com.tw/
select "DCS" then "825" and find the one you are looking for fw1.03 or ...
Firmware Firmware: DCS-825L A1 FW v1.05.04 13.84 MB .
Firmware Firmware: DCS-825L A1 FW v1.06 13.85 MB .
Firmware Firmware: DCS-825L_A1_FW 1.03-3725 14.02 MB .
Firmware Firmware: DCS-825L_A1_FW v1.04-4026 14.03 MB .
Firmware Firmware: DCS-825L_A1_FW1.00-3124 13.24 MB .
Firmware Firmware: DCS-825L_A1_FW1.01-3327 13.26 MB .
Firmware Firmware: DCS-825L_A1_FW1.02-3427 14.01 MB
DCS-825L firmware is available here: http://tsd.dlink.com.tw (http://tsd.dlink.com.tw/)/
-
I tried downgrading to v1.05 but the cgi pages didn't come back...
Please let me know if you succeed and how.
Thank you,
Roberto
-
I tried downgrading to v1.05 but the cgi pages didn't come back...
Please let me know if you succeed and how.
Thank you,
Roberto
sorry I dont remember exactly how I have done it, yes I downgrade ones from fw1.05 and also one time from fw1.06,
with my pc and via wlan connection to the dcs-825l
it was something like this:
http://xxx.xxx.xxx.xxx/eng/mainFrame_debug.cgi?nav=Status#
or
http://xxx.xxx.xxx.xxx/eng/admin/tools_admin.cgi
main menue with fw1.03 for all settings
(http://fs2.directupload.net/images/150510/sl4h9c4p.jpg)
-
I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.
If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.
Thank you,
Roberto
-
I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.
If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.
Thank you,
Roberto
hi
in fw 1.05 and 1.06 this are removed ... so I dont find a way,
also I use the fw1.03 and see no reason for the last firmware to use, if somebody like to use the hidden menues, only with old fw!
its writen under 3. (it is removed)
V1.05.04
1. Fixed the incorrect thermal LED status after reboot.
2. Change the default system time for year 2015.
3. Remove the hidden webpage for security concerns.
-
That's strange... I could swear that in v1.05 I still had those cgi pages.
Why did you chose v1.03 and not v1.04?
Thank you,
Roberto
-
That's strange... I could swear that in v1.05 I still had those cgi pages.
Why did you chose v1.03 and not v1.04?
Thank you,
Roberto
hi
I tested all of them and for me, all what I needed are in fw1.03, the others maybe need the last ones.
regards
alex
-
More about.....Difference between Machine.config and web.config (http://net-informations.com/faq/asp/machineconfig.htm)
Rino
-
How am I to disable the sound we can hear after we turn on the device? I have installed the latest firmware of baby camera.
-
Same problem here.
With the original firmware (1.01) I could acces the cgi pages. After upgrading to 1.04 not anymore.
After downgrading again still no luck...
I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.
If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.
Thank you,
Roberto
hi
in fw 1.05 and 1.06 this are removed ... so I dont find a way,
also I use the fw1.03 and see no reason for the last firmware to use, if somebody like to use the hidden menues, only with old fw!
its writen under 3. (it is removed)
V1.05.04
1. Fixed the incorrect thermal LED status after reboot.
2. Change the default system time for year 2015.
3. Remove the hidden webpage for security concerns.
-
Does v1.06 do the same thing?
http://forums.dlink.com/index.php?topic=64806.0 (http://forums.dlink.com/index.php?topic=64806.0)
- What Hardware version is your DCS? Look at the sticker behind or under the camera.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DCSs web page under status.
- What region are you located?
Same problem here.
With the original firmware (1.01) I could acces the cgi pages. After upgrading to 1.04 not anymore.
After downgrading again still no luck...
I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.
If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.
Thank you,
Roberto
hi
in fw 1.05 and 1.06 this are removed ... so I dont find a way,
also I use the fw1.03 and see no reason for the last firmware to use, if somebody like to use the hidden menues, only with old fw!
its writen under 3. (it is removed)
V1.05.04
1. Fixed the incorrect thermal LED status after reboot.
2. Change the default system time for year 2015.
3. Remove the hidden webpage for security concerns.
-
Hi,
Any chance of advanced config with firmware 1.08?
Need to change the settings of the recording. Now only very short recordings although there is movement all the time.
On the old cgi pages you could change the size/lenght of recordings.
Thnx in advance!
-
Something you might ask D-Link phone support about. I presume since the 825L is getting long in the pants that no new feature maybe added to the FW...