• March 28, 2024, 02:52:38 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: firmware update failed  (Read 5716 times)

xyvon

  • Level 1 Member
  • *
  • Posts: 3
firmware update failed
« on: June 27, 2016, 01:56:23 AM »

Hello everyone,

I wanted meter firmware update v 1.07.03.5710 but he failed.

The camera turns on but remains with the red power LED.
I tried to reset but it will not work.

Thank you for your help I do not know what to do  ???
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: firmware update failed
« Reply #1 on: June 27, 2016, 07:38:37 AM »

Link>Welcome!

  • What region are you located?

Try this to see if you can recover the camera: Emergency Recovery Mode

if this fails, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

xyvon

  • Level 1 Member
  • *
  • Posts: 3
Re: firmware update failed
« Reply #2 on: June 28, 2016, 01:52:26 AM »

Thank you for your reply,

I'm from France.

I Esaye this method of recovery that does not work. I have also Esaye with the SD card and the Update folder with upgrade.bin but that did not work either.

I contacted support and come back to, I'm sure it'll help others.

Yvon
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: firmware update failed
« Reply #3 on: June 28, 2016, 06:12:02 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

xyvon

  • Level 1 Member
  • *
  • Posts: 3
Re: firmware update failed
« Reply #4 on: July 04, 2016, 07:51:52 AM »

Hello, here is the continuation of the adventure,

So I contacted the telephone carrier D-Link France.

He gave it to me a fair procedure to reset, and have a wifi network of secour.
But here is the procedure did not work reset.

So I called the support that has climbed back to Level 2.

After two days it reminded me to make reset handling, but the camera does not want to know anything, it seems empty after the technician.

Dlink asked me my proof of purchase and me gonna replace the camera.

Very very satisfied with the D-Link support ;)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: firmware update failed
« Reply #5 on: July 04, 2016, 01:04:38 PM »

Thanks for the update.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.