Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[murraydr44]

I tried DMZ and port forwards, with no success on the DGL-5500.  I noticed that the DIR-810L I picked up on Boxing week at Staples had the WAN ping reply option, so it is now running as the WAN router.  I also lucked out and got the DIR-810L to work with TSI's IPv6 beta program, except that the prefix delegation doesn't work with other (openwrt)routers.

[FurryNutz]

Ya. The 810L has the WAN Ping respond feature while the 5500 doesn't.

I'll ask about it. 

I tried DMZ and port forwards, with no success on the DGL-5500.  I noticed that the DIR-810L I picked up on Boxing week at Staples had the WAN ping reply option, so it is now running as the WAN router.  I also lucked out and got the DIR-810L to work with TSI's IPv6 beta program, except that the prefix delegation doesn't work with other (openwrt)routers.

[mrjezza]

Feauture requests:
1. Devices in My Network that have a reserved IP can use the name saved alongside the reservation instead of their announced name. Some devices announce a stupid name that's to do with their network chipset, and others don't seem to announce correctly at all and come up as unknown/blank.

This feature would work well with 3 options:
a) use announced name/"off"
b) use reserved name where announced name is unknown or blank/"auto"
c) always use reserved name/"always"

2. For each IP reservation, ability to use auto classification of the device type as it already is, or to manually choose from the list of available classifications within streamboost and lock the reservation to that device type.  I'm have some devices on my network that don't get classified correctly or at all.

If you're reserving an IP, chances are the device attached to the mac address isn't going to change so there's not really any downside to offering this feature.  Wifi dongles and portable NICs are an obvious exception but just leave these on "auto" and all will be fine.

[FurryNutz]

Added to list. Thank you for your feed back.

Feauture requests:
1. Devices in My Network that have a reserved IP can use the name saved alongside the reservation instead of their announced name. Some devices announce a stupid name that's to do with their network chipset, and others don't seem to announce correctly at all and come up as unknown/blank.

This feature would work well with 3 options:
a) use announced name/"off"
b) use reserved name where announced name is unknown or blank/"auto"
c) always use reserved name/"always"

2. For each IP reservation, ability to use auto classification of the device type as it already is, or to manually choose from the list of available classifications within streamboost and lock the reservation to that device type.  I'm have some devices on my network that don't get classified correctly or at all.

If you're reserving an IP, chances are the device attached to the mac address isn't going to change so there's not really any downside to offering this feature.  Wifi dongles and portable NICs are an obvious exception but just leave these on "auto" and all will be fine.

[FurryNutz]

Feature Requests:

• [Added January 29, 2014]
  "1. Devices in My Network that have a reserved IP can use the name saved alongside the reservation instead of their announced name. Some devices announce a stupid name that's to do with their network chipset, and others don't seem to announce correctly at all and come up as unknown/blank.
  
  This feature would work well with 3 options:
  a) use announced name/"off"
  b) use reserved name where announced name is unknown or blank/"auto"
  c) always use reserved name/"always"
  
  2. For each IP reservation, ability to use auto classification of the device type as it already is, or to manually choose from the list of available classifications within streamboost and lock the reservation to that device type.  I'm have some devices on my network that don't get classified correctly or at all.
  
  If you're reserving an IP, chances are the device attached to the mac address isn't going to change so there's not really any downside to offering this feature.  Wifi dongles and portable NICs are an obvious exception but just leave these on "auto" and all will be fine."
  Will pass to D-Link for review. D-Link may nor may not be accepting any more feature requests.
  Thank you for your feed back.
  
  
• [Added April 17, 2014]
  Port Triggering support. Would help a great deal in multi console homes.
  
  
• [Added March 17, 2014]
  “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
   
  Guest network.  (Gamers also have friends and family visit).
  Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.
  
  Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November" -10/08/2014 This request is not a feature as the 1st Sunday is actually part of the 2nd week of November.   Thus, not considered an issue by D-Link.
  
  
• [Added February 09, 2014] 'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
  
  I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
  
  I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  

BUGS:

• [Added November 11, 2014] Setup wizard and manual testing of ABE speed test is failing to complete successfully. “Bandwidth Test Failed” message is received.
  
  
• [Added Feburary 18, 2014] Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
  http://forums.dlink.com/index.php?topic=57991.0
  
  
• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  

FIXED: Thank you D-Link 

FW v1.13B04Beta

• [Added January 28, 2014] DMZ and DDNS not saving changed settings
  
  
• [Added January 28, 2014] Receive a “413 - Request Entity Too Large” is displayed after logging into the router, making a change and selecting save settings. Users have to soft reboot the router to clear the message and continue to make any changes.
  
  
  FW v1.13B02NA
  
• [Verified November 11, 2014] Double display of icons are fixed.
  
  
• [Verified November 11, 2014] Inline documentation of the 4500.
  Look for the “?” mark in the upper right hand corner of the routers web page.
  
  
• [Verified November 11, 2014] Duplicate device icons are being displayed in the Networking and Priorities list for some devices.
  http://forums.dlink.com/index.php?topic=59817.msg238505#msg238505 and http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506. Related issue>
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 11, 2014] Unsaved Changes message is displayed when selecting StreamBoost options and navigating away from these options to a different location when no configurations were made by the user at all. First seen>
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  
• [Verified November 11, 2014] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. This issue was seen before, then resolved in FW v1.11B03NA. My router managed to go 9-10days of being online before I could not access the routers web page. http://forums.dlink.com/index.php?topic=55441.0.
  
  
• [Verified November 11, 2014] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Verified November 11, 2014] Connecting a DIR-865L v1.06 on 5Ghz AC bridge mode to the DGL-5500 causes the DGL-5500 to crash. The Power LED turns OFF an the Internet LED turns amber. Prior version of v1.11 B03 worked and did not exhibit this issue.
  
  
• [Verified November 11, 2014] IE11 on Windows 7x32, the right side IP addresses for My Networking icons is getting cut off in the display. No matter what I do to zoom in or out or use compatibility mode, the IP address is not displayed fully and no scroll bar is available on a 16x9 LCD monitor. http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506
  
  
• [Verified November 11, 2014] MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
  http://forums.dlink.com/index.php?topic=57050.0
  
  Un-verified Bugs in v1.12 B05: I'll update as I test for these issue in this new build of FW.
  
• [Verified November 11, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.
  
  
• [Verified November 11, 2014] Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.
  
  FW v1.12B05NA
  
  • [Verified June 25, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
    http://forums.dlink.com/index.php?topic=56761.0
    
    
  • [Verified June 25, 2014] The new drag and drop feature was added to the Priority list. "User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking."
    
    
  • [Verified June 25, 2014] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
    
    
  • [Verified June 25, 2014] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
    
    
  • [Verified June 25, 2014] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
    
    
  • [Verified June 25, 2014] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history. > Router logs only hold 9-10 pages before over writing the oldest running information.
    
    
  • [Verified June 25, 2014] Improve 5Ghz wireless range.
    
    
  • [Verified June 25, 2014] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
    
    
    FW v1.11B03NA
    
    • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
      
      
    • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
      
      
    • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
      
      
    • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
      
      
    • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
      
      FW v1.10NA
      
    • [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
       
      
    • [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
      
      
    • [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
      WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
      
      
    • [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
      
      
    • [Verified September 10, 2013] Improve 5Ghz wireless range.
      
      
    • [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
      
      
    • [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
      
      
    • [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
      
      
    • [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
      
      
    • [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
      
      
    • [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
      

[FurryNutz]

Feature Requests:

• [Added January 29, 2014]
  "1. Devices in My Network that have a reserved IP can use the name saved alongside the reservation instead of their announced name. Some devices announce a stupid name that's to do with their network chipset, and others don't seem to announce correctly at all and come up as unknown/blank.
  
  This feature would work well with 3 options:
  a) use announced name/"off"
  b) use reserved name where announced name is unknown or blank/"auto"
  c) always use reserved name/"always"
  
  2. For each IP reservation, ability to use auto classification of the device type as it already is, or to manually choose from the list of available classifications within streamboost and lock the reservation to that device type.  I'm have some devices on my network that don't get classified correctly or at all.
  
  If you're reserving an IP, chances are the device attached to the mac address isn't going to change so there's not really any downside to offering this feature.  Wifi dongles and portable NICs are an obvious exception but just leave these on "auto" and all will be fine."
  Will pass to D-Link for review. D-Link may nor may not be accepting any more feature requests.
  Thank you for your feed back.
  
  
• [Added April 17, 2014]
  Port Triggering support. Would help a great deal in multi console homes.
  
  
• [Added March 17, 2014]
  “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
   
  Guest network.  (Gamers also have friends and family visit).
  Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.
  
  Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November" -10/08/2014 This request is not a feature as the 1st Sunday is actually part of the 2nd week of November.   Thus, not considered an issue by D-Link.
  
  
• [Added February 09, 2014] 'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
  
  I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
  
  I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  

BUGS:

• [Added February 17, 2014] DDNS is not displaying a Connected Status when connected or not connected to services.
  http://forums.dlink.com/index.php?topic=61712.msg250416#msg250416
  
  
• [Added February 17, 2014] Xbox One doesn't seem to be catagorized correctly.
  http://forums.dlink.com/index.php?topic=61712.msg250189#msg250189
  
  
• [Added November 11, 2014] Setup wizard and manual testing of ABE speed test is failing to complete successfully. “Bandwidth Test Failed” message is received.
  
  
• [Added Feburary 18, 2014] Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
  http://forums.dlink.com/index.php?topic=57991.0
  
  
• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  

FIXED: Thank you D-Link 

FW v1.13B04Beta

• [Added January 28, 2014] DMZ and DDNS not saving changed settings
  
  
• [Added January 28, 2014] Receive a “413 - Request Entity Too Large” is displayed after logging into the router, making a change and selecting save settings. Users have to soft reboot the router to clear the message and continue to make any changes.
  
  
  FW v1.13B02NA
  
• [Verified November 11, 2014] Double display of icons are fixed.
  
  
• [Verified November 11, 2014] Inline documentation of the 4500.
  Look for the “?” mark in the upper right hand corner of the routers web page.
  
  
• [Verified November 11, 2014] Duplicate device icons are being displayed in the Networking and Priorities list for some devices.
  http://forums.dlink.com/index.php?topic=59817.msg238505#msg238505 and http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506. Related issue>
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 11, 2014] Unsaved Changes message is displayed when selecting StreamBoost options and navigating away from these options to a different location when no configurations were made by the user at all. First seen>
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  
• [Verified November 11, 2014] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. This issue was seen before, then resolved in FW v1.11B03NA. My router managed to go 9-10days of being online before I could not access the routers web page. http://forums.dlink.com/index.php?topic=55441.0.
  
  
• [Verified November 11, 2014] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Verified November 11, 2014] Connecting a DIR-865L v1.06 on 5Ghz AC bridge mode to the DGL-5500 causes the DGL-5500 to crash. The Power LED turns OFF an the Internet LED turns amber. Prior version of v1.11 B03 worked and did not exhibit this issue.
  
  
• [Verified November 11, 2014] IE11 on Windows 7x32, the right side IP addresses for My Networking icons is getting cut off in the display. No matter what I do to zoom in or out or use compatibility mode, the IP address is not displayed fully and no scroll bar is available on a 16x9 LCD monitor. http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506
  
  
• [Verified November 11, 2014] MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
  http://forums.dlink.com/index.php?topic=57050.0
  
  Un-verified Bugs in v1.12 B05: I'll update as I test for these issue in this new build of FW.
  
• [Verified November 11, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.
  
  
• [Verified November 11, 2014] Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.
  
  FW v1.12B05NA
  
  • [Verified June 25, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
    http://forums.dlink.com/index.php?topic=56761.0
    
    
  • [Verified June 25, 2014] The new drag and drop feature was added to the Priority list. "User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking."
    
    
  • [Verified June 25, 2014] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
    
    
  • [Verified June 25, 2014] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
    
    
  • [Verified June 25, 2014] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
    
    
  • [Verified June 25, 2014] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history. > Router logs only hold 9-10 pages before over writing the oldest running information.
    
    
  • [Verified June 25, 2014] Improve 5Ghz wireless range.
    
    
  • [Verified June 25, 2014] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
    
    
    FW v1.11B03NA
    
    • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
      
      
    • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
      
      
    • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
      
      
    • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
      
      
    • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
      
      FW v1.10NA
      
    • [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
       
      
    • [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
      
      
    • [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
      WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
      
      
    • [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
      
      
    • [Verified September 10, 2013] Improve 5Ghz wireless range.
      
      
    • [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
      
      
    • [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
      
      
    • [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
      
      
    • [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
      
      
    • [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
      
      
    • [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
      

[FurryNutz]

Trying to help close the last few bugs reported if possible. The DGL-5500 is at end game and I presume D-Link may not be pushing any more FW updates. Unless maybe there are some items we can help them complete. Please help with any information regarding these last few bug items and let me know if they are still happening so I can let D-Link know before the officially close development. 
BUGS:

• [Added February 17, 2015] DDNS is not displaying a Connected Status when connected or not connected to services.
  http://forums.dlink.com/index.php?topic=61712.msg250416#msg250416
  
  
• [Added February 17, 2015] Xbox One doesn't seem to be catagorized correctly.
  http://forums.dlink.com/index.php?topic=61712.msg250189#msg250189
  
  
• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  

FIXED: Thank you D-Link 

FW v1.13B04Beta/Release

• [Verified February 10, 2015] Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
  http://forums.dlink.com/index.php?topic=57991.0
  This was verified using my personal router sent to a ISP service whom tested the router on there ISP speed package service. Router was tested up to 200/100 link speeds.
  
  
• [Verified January 28, 2015] Setup wizard and manual testing of ABE speed test is failing to complete successfully. “Bandwidth Test Failed” message is received.
  
  
• [Verified January 28, 2015] DMZ and DDNS not saving changed settings
  
  
• [Verified January 28, 2015] Receive a “413 - Request Entity Too Large” is displayed after logging into the router, making a change and selecting save settings. Users have to soft reboot the router to clear the message and continue to make any changes.
  
  
  FW v1.13B02NA
  
• [Verified November 11, 2014] Double display of icons are fixed.
  
  
• [Verified November 11, 2014] Inline documentation of the 4500.
  Look for the “?” mark in the upper right hand corner of the routers web page.
  
  
• [Verified November 11, 2014] Duplicate device icons are being displayed in the Networking and Priorities list for some devices.
  http://forums.dlink.com/index.php?topic=59817.msg238505#msg238505 and http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506. Related issue>
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 11, 2014] Unsaved Changes message is displayed when selecting StreamBoost options and navigating away from these options to a different location when no configurations were made by the user at all. First seen>
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  
• [Verified November 11, 2014] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. This issue was seen before, then resolved in FW v1.11B03NA. My router managed to go 9-10days of being online before I could not access the routers web page. http://forums.dlink.com/index.php?topic=55441.0.
  
  
• [Verified November 11, 2014] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Verified November 11, 2014] Connecting a DIR-865L v1.06 on 5Ghz AC bridge mode to the DGL-5500 causes the DGL-5500 to crash. The Power LED turns OFF an the Internet LED turns amber. Prior version of v1.11 B03 worked and did not exhibit this issue.
  
  
• [Verified November 11, 2014] IE11 on Windows 7x32, the right side IP addresses for My Networking icons is getting cut off in the display. No matter what I do to zoom in or out or use compatibility mode, the IP address is not displayed fully and no scroll bar is available on a 16x9 LCD monitor. http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506
  
  
• [Verified November 11, 2014] MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
  http://forums.dlink.com/index.php?topic=57050.0
  
  Un-verified Bugs in v1.12 B05: I'll update as I test for these issue in this new build of FW.
  
• [Verified November 11, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.
  
  
• [Verified November 11, 2014] Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.
  
  FW v1.12B05NA
  
  • [Verified June 25, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
    http://forums.dlink.com/index.php?topic=56761.0
    
    
  • [Verified June 25, 2014] The new drag and drop feature was added to the Priority list. "User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking."
    
    
  • [Verified June 25, 2014] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
    
    
  • [Verified June 25, 2014] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
    
    
  • [Verified June 25, 2014] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
    
    
  • [Verified June 25, 2014] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history. > Router logs only hold 9-10 pages before over writing the oldest running information.
    
    
  • [Verified June 25, 2014] Improve 5Ghz wireless range.
    
    
  • [Verified June 25, 2014] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
    
    
    FW v1.11B03NA
    
    • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
      
      
    • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
      
      
    • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
      
      
    • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
      
      
    • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
      
      Feature Requests:
      
      • [Added January 29, 2014]
        "1. Devices in My Network that have a reserved IP can use the name saved alongside the reservation instead of their announced name. Some devices announce a stupid name that's to do with their network chipset, and others don't seem to announce correctly at all and come up as unknown/blank.
        
        This feature would work well with 3 options:
        a) use announced name/"off"
        b) use reserved name where announced name is unknown or blank/"auto"
        c) always use reserved name/"always"
        
        2. For each IP reservation, ability to use auto classification of the device type as it already is, or to manually choose from the list of available classifications within streamboost and lock the reservation to that device type.  I'm have some devices on my network that don't get classified correctly or at all.
        
        If you're reserving an IP, chances are the device attached to the mac address isn't going to change so there's not really any downside to offering this feature.  Wifi dongles and portable NICs are an obvious exception but just leave these on "auto" and all will be fine."
        Will pass to D-Link for review. D-Link may nor may not be accepting any more feature requests.
        Thank you for your feed back.
        
        
      • [Added April 17, 2014]
        Port Triggering support. Would help a great deal in multi console homes.
        
        
      • [Added March 17, 2014]
        “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
         
        Guest network.  (Gamers also have friends and family visit).
        Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.
        
        Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November" -10/08/2014 This request is not a feature as the 1st Sunday is actually part of the 2nd week of November.   Thus, not considered an issue by D-Link.
        
        
      • [Added February 09, 2014] 'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
        
        I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
        
        I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
        
        
      • [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
        Under review and consideration with D-Link at this time.
        
        
      • [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
        Under review and consideration with D-Link at this time.
        
        
      • [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
        Under review and consideration with D-Link at this time.
        
        
      • [Added August 03, 2013] Special Applications page.
        A feature that maybe incompatible with Streamboost.
         
        
      • [Added August 06, 2013] IPv6 support.
        Under review and consideration with D-Link at this time.
        
        
      • [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
        A feature that maybe incompatible with Streamboost.
         
        
      • [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
        Under review and consideration with D-Link at this time.
        
        
      • [Added August 07, 2013] DLNA certification.
        Under review and consideration with D-Link at this time.
         
        
      • [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
        Under review and consideration with D-Link at this time.
        
        
      • [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
        Under review and consideration with D-Link at this time.
         
        
      • [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
        Under review and consideration with D-Link at this time.
         
        
      • [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
        Under review and consideration with D-Link at this time.
         
        
      • [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
        A feature that maybe incompatible with Streamboost.