Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Great idea and request. I'll add it to the list.

It's been forwarded on. Thank you for posting.

I'd like to see a more user friendly stream boost priorities page. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. It's a lot of unnecessary clicking.

[FurryNutz]

Feature Requests:

• [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  
  
• [Added August 03, 2013] Full Device Info Status page.
  
  
• [Added August 03, 2013] Special Applications page.
   
  
• [Added August 06, 2013] IPv6 support.
   
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  
  
• [Added August 07, 2013] DLNA certification.
   
  
• [Added August 07, 2013] NTP Time Services and options.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  
  
• [Added August 25, 2013] Inline documentation of the 4500.
  

Bugs:

• [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
  
  
• [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
  

FIXED: Thank you D-Link 
FW v1.11B03NA

• [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
  
  
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
  
  
• [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
  
  
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  FW v1.10NA
  
• [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
   
  
• [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
  
  
• [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
  WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
  
  
• [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
  
  
• [Verified September 10, 2013] Improve 5Ghz wireless range.
  
  
• [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
  
  
• [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
  
  
• [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
  
  
• [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
  
  
• [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
  
  
• [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
  

[FurryNutz]

Feature Requests:

• [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  
  
• [Added August 25, 2013] Inline documentation of the 4500.
  Under review and consideration with D-Link at this time.
  
  

Bugs:

• [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
  
  
• [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
  

FIXED: Thank you D-Link  
FW v1.11B03NA

• [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
  
  
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
  
  
• [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
  
  
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  FW v1.10NA
  
• [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
   
  
• [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
  
  
• [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
  WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
  
  
• [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
  
  
• [Verified September 10, 2013] Improve 5Ghz wireless range.
  
  
• [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
  
  
• [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
  
  
• [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
  
  
• [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
  
  
• [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
  
  
• [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
  

[orphenshadow]

I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.

I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.

I would like Playstation 4 support as well as Battlefield 4 support on the ps4

[FurryNutz]

Feature Requests:

• [Added Feburary 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
  
  I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
  
  I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
  
  
• [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  
  
• [Added August 25, 2013] Inline documentation of the 4500.
  Under review and consideration with D-Link at this time.
  
  

Bugs:

• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  
  
• [Added Feburary 10, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
  http://forums.dlink.com/index.php?topic=56761.0
  
  
• [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
  
  
• [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
  

FIXED: Thank you D-Link  
FW v1.11B03NA

• [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
  
  
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
  
  
• [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
  
  
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  FW v1.10NA
  
• [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
   
  
• [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
  
  
• [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
  WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
  
  
• [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
  
  
• [Verified September 10, 2013] Improve 5Ghz wireless range.
  
  
• [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
  
  
• [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
  
  
• [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
  
  
• [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
  
  
• [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
  
  
• [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
  

[FurryNutz]

Feature Requests:

• [Added Feburary 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
  
  I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
  
  I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
  
  
• [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  
  
• [Added August 25, 2013] Inline documentation of the 4500.
  Under review and consideration with D-Link at this time.
  
  

Bugs:

• [Added Feburary 18, 2014]Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.
  
  
• [Added Feburary 18, 2014]Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
  http://forums.dlink.com/index.php?topic=57991.0
  
  
• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  
  
• [Added Feburary 10, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
  http://forums.dlink.com/index.php?topic=56761.0
  
  
• [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
  
  
• [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
  

FIXED: Thank you D-Link  
FW v1.11B03NA

• [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
  
  
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
  
  
• [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
  
  
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  FW v1.10NA
  
• [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
   
  
• [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
  
  
• [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
  WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
  
  
• [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
  
  
• [Verified September 10, 2013] Improve 5Ghz wireless range.
  
  
• [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
  
  
• [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
  
  
• [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
  
  
• [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
  
  
• [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
  
  
• [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
  

[FurryNutz]

Feature Requests:

• [Added Feburary 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
  
  I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
  
  I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
  
  
• [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  
  
• [Added August 25, 2013] Inline documentation of the 4500.
  Under review and consideration with D-Link at this time.
  
  

Bugs:

• [Added March 07, 2014]MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
  http://forums.dlink.com/index.php?topic=57050.0
  
  
• [Added Feburary 18, 2014]Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.
  
  
• [Added Feburary 18, 2014]Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
  http://forums.dlink.com/index.php?topic=57991.0
  
  
• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  
  
• [Added Feburary 10, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
  http://forums.dlink.com/index.php?topic=56761.0
  
  
• [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
  
  
• [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
  

FIXED: Thank you D-Link  
FW v1.11B03NA

• [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
  
  
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
  
  
• [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
  
  
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  FW v1.10NA
  
• [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
   
  
• [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
  
  
• [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
  WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
  
  
• [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
  
  
• [Verified September 10, 2013] Improve 5Ghz wireless range.
  
  
• [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
  
  
• [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
  
  
• [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
  
  
• [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
  
  
• [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
  
  
• [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
  

[WirelessWeaver]

Bug: 1.11B03NA - allows entry of invalid admin password that subsequently fails login authentication

Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct.

Device should prevent entry of an admin password that subsequently will not pass login authentication.

Note: 16 character passwords worked with 1.01.

[WirelessWeaver]

Additional suggestions:

1) Make the admin timeout configurable.
Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations.

2) Reduce time required for complicated manual configurations. 
Allow more apply settings later, rather than so many repeated countdowns.
 
3) Show the interface that a device is connected on -- ethernet, 2.4 GHz, or 5 GHz.

4) When displaying/selecting a device, show the dhcp reservation host name rather than "UNKNOWN".

5) Guest network.  (Gamers also have friends and family visit).

6) Change daylight savings time default start/end dates to NA typical.
"most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November"

[FurryNutz]

Added, thank you.

Bug: 1.11B03NA - allows entry of invalid admin password that subsequently fails login authentication

Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct.

Device should prevent entry of an admin password that subsequently will not pass login authentication.

Note: 16 character passwords worked with 1.01.

[FurryNutz]

Additional suggestions:

1) Make the admin timeout configurable.
Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations.
Added, Thank you.

2) Reduce time required for complicated manual configurations.  
Allow more apply settings later, rather than so many repeated countdowns.
Added, Thank you.
 
3) Show the interface that a device is connected on -- ethernet, 2.4 GHz, or 5 GHz.
Not Added. Already Feature Requested.

4) When displaying/selecting a device, show the dhcp reservation host name rather than "UNKNOWN".
Not Added. The "UNKNOWN" status is just the routers handling of what it can't identify the host name value on the device when handshaking with the device, when the "HOSTNAME" value is not present or is not supported on the device, the router reports it as a "unknown" for host name. You need to set a host name value on all supporting devices before the router will pass this info into the host name value on the router.

5) Guest network.  (Gamers also have friends and family visit).
 Added, Thank you. Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.GZ may interfere with GameFuel or SB processing if users would be connected. I personally would not want any GZ traffic effecting game play and router processing for game play.

6) Change daylight savings time default start/end dates to NA typical.
"most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November"
 Added, Thank you.

[FurryNutz]

Feature Requests:

• [Added March 17, 2014]
  “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
   
  Guest network.  (Gamers also have friends and family visit).
  Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.
  
  Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November"
  
  
• [Added February 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.
  
  I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.
  
  I would like Playstation 4 support as well as Battlefield 4 support on the ps4."
  
  
• [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 03, 2013] Special Applications page.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 06, 2013] IPv6 support.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
  A feature that maybe incompatible with Streamboost.
   
  
• [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 07, 2013] DLNA certification.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
  Under review and consideration with D-Link at this time.
  
  
• [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
  Under review and consideration with D-Link at this time.
   
  
• [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
  A feature that maybe incompatible with Streamboost.
  
  
• [Added August 25, 2013] Inline documentation of the 4500.
  Under review and consideration with D-Link at this time.
  
  

Bugs:

• [Added March 17, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.
  
  
• [Added March 07, 2014]MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
  http://forums.dlink.com/index.php?topic=57050.0
  
  
• [Added Feburary 18, 2014]Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.
  
  
• [Added Feburary 18, 2014]Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
  http://forums.dlink.com/index.php?topic=57991.0
  
  
• [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
  http://forums.dlink.com/index.php?topic=57777.0
  
  
• [Added Feburary 10, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
  http://forums.dlink.com/index.php?topic=56761.0
  
  
• [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0
  
  
• [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.
  
  
• [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.
  

FIXED: Thank you D-Link  
FW v1.11B03NA

• [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0
  
  
• [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0
  
  
• [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.
  
  
• [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.
  
  
• [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.
  
  FW v1.10NA
  
• [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
   
  
• [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.
  
  
• [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
  WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.
  
  
• [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.
  
  
• [Verified September 10, 2013] Improve 5Ghz wireless range.
  
  
• [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.
  
  
• [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.
  
  
• [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.
  
  
• [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.
  
  
• [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0
  
  
• [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
  

[WirelessWeaver]

4) When displaying/selecting a device, show the dhcp reservation host name rather than "UNKNOWN".
Not Added. The "UNKNOWN" status is just the routers handling of what it can't identify the host name value on the device when handshaking with the device, when the "HOSTNAME" value is not present or is not supported on the device, the router reports it as a "unknown" for host name. You need to set a host name value on all supporting devices before the router will pass this info into the host name value on the router.

Here is the motivation for this request:
1) Some devices don't allow entry of a device name.
2) Some device names don't appear on the DGL5500.  PCs, ipad, and iphone device/system names all show up on the DGL5500.  PS3 doesn't appear to work, all display as Playstation 3.
3) Privacy.  Even if the DGL5500 will show the device name, some would prefer their devices that might be used on other networks -- hotspots -- have a vanilla device name for privacy.

Please reconsider allowing association of a device name with a mac address.  The DHCP reservation table already provides a logical place for this - enter a mac address, ip address, and desired device name.

[FurryNutz]

Please re-read the response...There maybe some devices that the FW and HOSTNAME handshaking can not detect. In this case you'll need to compare the MAC address on the router with the address visually either on the device or in the devices network settings.

Here is the motivation for this request:
1) Some devices don't allow entry of a device name.
2) Some device names don't appear on the DGL5500.  PCs, ipad, and iphone device/system names all show up on the DGL5500.  PS3 doesn't appear to work, all display as Playstation 3.
3) Privacy.  Even if the DGL5500 will show the device name, some would prefer their devices that might be used on other networks -- hotspots -- have a vanilla device name for privacy.

Please reconsider allowing association of a device name with a mac address.  The DHCP reservation table already provides a logical place for this - enter a mac address, ip address, and desired device name.

[WirelessWeaver]

Only some of the DGL5500 pages show the device mac address.
For example "My network", mouse over a device and it provides the mac address and additional information.

However, there are pull down menus that show just the device name.
See "Statistics", "Usage by Time" and click on "All Devices"...
A large number of devices with name "undefined" and "UNKNOWN" typically appear.
Without a unique device name the statistics per device feature (when it works) will be difficult to use.

Please re-read the response...There maybe some devices that the FW and HOSTNAME handshaking can not detect. In this case you'll need to compare the MAC address on the router with the address visually either on the device or in the devices network settings.