• April 18, 2024, 12:01:49 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: canīt access into camera interface with 192.168.1.100  (Read 7371 times)

cuca

  • Level 1 Member
  • *
  • Posts: 3
canīt access into camera interface with 192.168.1.100
« on: May 12, 2013, 08:57:05 AM »
Hello. I have a real big proble. Months ago i can enter in the camera interface by using 192.168.1.100  , its correct ip to enter in the cammera ?  Now i dont know what is happening i connect the ethernet cable correctly  from PC to the camera and i type in the browser : 192.168.1.100 but nothiung happen ? What da hell is happening ? im doing something wrong ?  PLEASE NEED HELP !   Maybe my ethernet camera interface has been damaged ????  Thanks and sorry im very annoyed with this . I will never buy a D link camera any more. This camera cost me more than 150 euros and always gives me problems .  Please, need a help
Logged

Popovice

  • Level 2 Member
  • **
  • Posts: 51
Re: canīt access into camera interface with 192.168.1.100
« Reply #1 on: May 12, 2013, 09:40:50 AM »
So it seems that you have a direct Ethernet connection from the PC to the camera and no router or WLAN access point in between?

In this case I recommend that you delete the cache and history files of your browser and then restart the PC (with IE: Tools -> Internet Options -> Delete browsing history). Hope this helps.
Logged

cuca

  • Level 1 Member
  • *
  • Posts: 3
Re: canīt access into camera interface with 192.168.1.100
« Reply #2 on: May 12, 2013, 11:31:05 PM »
Yes, i have the ethernet cable from PC to CAM because i want to access the cam interface . Im not sure but the ip addres is : 192.168.1.100  right ? what im doing wrong ?
Logged

cuca

  • Level 1 Member
  • *
  • Posts: 3
Re: canīt access into camera interface with 192.168.1.100
« Reply #3 on: May 13, 2013, 12:10:29 AM »
problem solved. I needed to insert the CDROM to configure the camera. That was the solution , do the setup with the CDROM.  Thanks . BytheWay this camera gives lot of problems in the setup , wireless detection problems ... bugged interface ... lot of problems ... good solution at the end but could be more easy to configure ... just only need 3 or 4 options ! no more ! and this camera has 20.000 options to configure ! this is not a security camera, just only a little home-camera ! enough ! its enough with few options ! dont complicate the things !   thanks.
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: canīt access into camera interface with 192.168.1.100
« Reply #4 on: May 14, 2013, 04:58:51 PM »
Quote from: cuca on May 12, 2013, 11:31:05 PM
Yes, i have the ethernet cable from PC to CAM because i want to access the cam interface . Im not sure but the ip addres is : 192.168.1.100  right ? what im doing wrong ?

Why can't you access the cam interface with the camera hooked up into your router?
 ???
Logged

kk287

  • Level 1 Member
  • *
  • Posts: 3
Re: canīt access into camera interface with 192.168.1.100
« Reply #5 on: May 18, 2013, 08:20:18 AM »
bro i configure my ip cam(dcs-942l) on this url http://petkonextest.dlinkddns.com:8080/

plz tell me how i can access cam windows or cam videos in my webpage ?

i have read pdf doc but didn't understand bcoz i don't have much knowledge about this, plz do assist in this matter. any help will be appriciated.thanks in advance

plz just paste simple code here that tell how i can get it in webpage(html or php page).

url http://petkonextest.dlinkddns.com:8080/
my email : kaleem.khan287@gmail.com
Logged