Software > Shareport - Windows
Shareport 4.5 + DIR655 + Windows 10 = :(
(1/1)
vorpaljim:
Hi,
I have a USB external drive and when I plug it straight into the PC running Windows 10 (version 1511, build 10586.104), it works fine.
But when it is plugged into my DIR-655 router, Shareport (ver 4.5) connects to it just fine but the drive is not accessible through Windows Explorer. It is there but not accessible. When I click on it, I get the following error:
I:\is not accessible.The request could not be performed because of an I/O device error.
In Disk Management, the disk is showing as RAW format.
With the exact same computer, running Windows 7 SP1, it works fine.
I've spent a day scouring the internet for a solution and couldn't find one. I read in a post on here that it may have something to do with KB3097617, but I don't have that update installed.
Hoping someone has a fix for me
Thanks!
FurryNutz:
Link>Welcome!
* What Hardware version is your router? Look at sticker under the router case.
* Link>What Firmware version is currently loaded? Found on the routers web page under status.
* What region are you located?
I presume that since Windows 7 it works, Windows 10 maybe the issue. I haven't had a chance to test SP out with any of my routers yet with Windows 10. ::)
Whats the size of this USB drive?
vorpaljim:
Running version A with Firmware 1.37NA
Region is Eastern Time US/Canada
The Drive is 3TB.
Yeah, It's clearly a Windows 10 issue since it works on Windows 7 on the same PC. Also tried it on another PC running Windows 7 and it works too. Others have reported a similar issue here and elsewhere on the net but nobody with my exact issue.
FurryNutz:
It's possible that the SP app may need updating. Not sure of this will happen as SP app is getting to be a bit old and not sure if D-Link would invest any more time into it. You might phone contact support and ask to see if there is any information regarding Windows 10 and SP.
Navigation
[0] Message Index
Go to full version