Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jangodoggy]

Uuups trying againg:)

http://www.speedtest.net/my-result/4824354463

[FurryNutz]

Is with this QoS enabled or disabled?
What version of FW is currently loaded?

Uuups trying againg:)

http://www.speedtest.net/my-result/4824354463

[jangodoggy]

Hi it's with Qos disabled and DNS disabled. Firmware is now 1.09

[FurryNutz]

Please test with QoS enabled, Use Strict Priority, and set your UP and Down speeds in the presets. Test with DNS Relay enabled and disabled and post the speed results please. Thank you.

Hi it's with Qos disabled and DNS disabled. Firmware is now 1.09

[FurryNutz]

Just updated my buddys 868L router to v1.10WW from v1.04:
Has same model Motorola SB 6121 cable modem as I do. 100/10 ISP

Before enabling QoS:


After Enabling QoS:


Seems like this was introduced sometime after v1.04 possibly.

Update: Been told a fix will be forth coming for this issue on the 868L. Yay.  No timeframe on when it will be released. Be patient and check the main web site here and there for updates.

[FrankTheTank]

I get about a 33% drop in in my Download speed when QoS is enabled with 1.09.  What the hell is going on?

[FrankTheTank]

After several failed attempts to contact FuryNutz to confirm the status of a firmware fix for the QoS issue (all of which were ignored) I decided to contacted DLINK support directly.  They are aware of the issue, however, they are not working on a firmware update to fix it. 

Looks like we are out of luck.

[FurryNutz]

If you had looked closer to my updated post, your question was answered:
http://forums.dlink.com/index.php?topic=55708.msg265441#msg265441

I will re-confirm what I was told. Can you try loading v1.07 and test?

[FrankTheTank]

If you had looked closer to my updated post, your question was answered:
http://forums.dlink.com/index.php?topic=55708.msg265441#msg265441

I will re-confirm what I was told. Can you try loading v1.07 and test?

You updated your post two weeks after I asked you for confirmation.  By that point I had given up trying to reach you and contacted DLINK support directly.

I have tried all firmware versions and each is having the QoS problem.  The customer support rep. I talked to at DLINK said they are aware of the problem, but that they are not working on a fix for it.

[FurryNutz]

They may be not working at this time on it and may later on. I'll re-confirm.
Thanks.

[FrankTheTank]

They may be not working at this time on it and may later on. I'll re-confirm.
Thanks.

No, I was told directly that they are not working on a fix.  They may work on one later, however, at this time they are not.

[FurryNutz]

No, it's under review with D-Link from I'm told and one last FW update should be forth coming before EOL.
The problem is only seen with ISP speeds 100Mb ISP speeds. Users with 100Mb ISP speeds and above should disable QoS until further notice.

[FrankTheTank]

No, it's under review with D-Link and one last FW update should be forth coming before EOL from what I'm told.

Who told you this?  The customer support rep I spoke to said they were aware of the problem but that they were not working on a fix.  It sounds like you are speculating.

The problem is only seen with ISP speeds 100Mb ISP speeds. Users with 100Mb ISP speeds and above should disable QoS until further notice.

I'm not sure how you came to believe this, but my connection is only 55 Mb and I have the problem.

[FurryNutz]

I think the cut off problem is at 50. I have a friend w 40mb ISP and his works. I have contact w D-Link.

[FrankTheTank]

No, it's under review with D-Link from I'm told and one last FW update should be forth coming before EOL.

The router is now EOL and what a surprise...no fix.  Like I said, DLINK wasn't working on a fix for the QoS issue.  You where speculating that a fix was coming, and now we can be certain that one never will.