D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2230 => Topic started by: efrecon on September 03, 2014, 03:58:55 AM
-
(I also own a DCS-2132L, on which I have tried most of the same stuff without more luck, so I will be cross-posting there as well.)
I have been spending a number of days figuring out how to send AUDIO to the camera so this audio stream will be played on the internal speaker without any luck. Has anyone been able to do that? Could anyone point me to a knowledgable person at D-link (?) or elsewhere? Here is what I've been trying:
- My first attempt has been to use the documented NIPCA API/SDK and especially the /dev/speaker.cgi entry. Basically, what should work is to post S16_LE PCM data (so signed 16 bits per sample, little endian encoded) at a rate of 8000 samples per second and mono. The data should be packetised using the (A)CAS format. Since I have code to get data from the camera, I have been able to verify that there isn't any problem with my ACAS packetisation (I've tried to packetise and de-packetise local data to verify that it's kept the same!). However, when I send this all to the camera, with proper timing, the result is sound on the speaker, but hardly what I've sent! I've tried many other sound formats, etc. without any luck. These were just a last-shot, since what's documented is what I've described above...
- My second attempt has been through understanding what the Internet Explorer interface is doing. When running on IE, the ActiveX component performs a continuous POST operation to /ipcam/speakstream.cgi. I've captured a stream sent from my PC using wireshark, removed the header from the POST operation and thus been able to get to the raw binary data of the stream that is being sent to the camera using that entry point. I've come so far as to understand that the audio is coded using some sort of ADPCM, without understanding which exact variation it uses. The closest I got was G.726: When I listen back to the raw data using G.726, I can hear myself, albeit with an enormous amount of background noise.
So which entry point should I use? Is there yet another one? and in which specific format should the sound and packets be. POST:ing using regular HTTP is the only real option that I have, UDP is out of my scope of operation.
[/list]
-
Some progress on this, see http://forums.dlink.com/index.php?topic=60673.msg243018#msg243018 (http://forums.dlink.com/index.php?topic=60673.msg243018#msg243018)