• March 28, 2024, 08:40:02 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: WBR-2310 Rev A1 + Firmware 1.05  (Read 8803 times)

Darkpawn

  • Level 1 Member
  • *
  • Posts: 1
WBR-2310 Rev A1 + Firmware 1.05
« on: July 07, 2009, 08:30:03 AM »

Hello all.

      I just recently upgraded the firmware on my router from 1.02 to 1.05 and now I cannot login to the admin page.   I have already reset the router, and used a hard reset as well.  Any ideas.  Thanks.
Logged

cloon

  • Level 2 Member
  • **
  • Posts: 50
Re: WBR-2310 Rev A1 + Firmware 1.05
« Reply #1 on: July 08, 2009, 03:00:05 PM »

did you tried  to put nothing as password ???

user:admin
password:


it cleared when you install a new firmware along with all your settings...
Logged

calvarez

  • Level 1 Member
  • *
  • Posts: 4
Re: WBR-2310 Rev A1 + Firmware 1.05
« Reply #2 on: July 09, 2009, 09:45:16 AM »

Is your computer wired in router? Does it has a WLAN enabled while hardwired in router? You might need to disable your WLAN,possible that you are connected to somebody's network. Then try access the router's page again. If still fails, try a hardware reset.
Logged

Renelson De Jesus

  • Level 1 Member
  • *
  • Posts: 11
Re: WBR-2310 Rev A1 + Firmware 1.05
« Reply #3 on: July 10, 2009, 12:19:15 PM »

This is part of our old "techniques" for such cases, but it may work :)

1. While the router is on, push the reset button at the back of the router for 10 seconds
2. once you reached 10 seconds and still holding up the reset button, try to turn the router off by pulling the power cord then count for more 10 seconds
3. after the last 10 seconds, turn the router on while still holding the reset button and wait for another 10 seconds before you release it

overall, you have 30 seconds to press the reset button. Most of the cases like this, we tend to resolve it using this method, try to give it a try and see how it goes :)
Logged

jonesb

  • Level 2 Member
  • **
  • Posts: 33
Re: WBR-2310 Rev A1 + Firmware 1.05
« Reply #4 on: August 16, 2009, 06:48:11 PM »

If you can get by the above issues, I suggest going back to firmware 1.04

I have found it the best of all firmwares except the DI-624 which I am reluctant to try.

Logged