D-Link Forums

The Graveyard - Products No Longer Supported => Hubs and Switches => DGS-1224T => Topic started by: MeWhoElse on February 17, 2012, 06:14:25 AM

Title: DGS-1210-10P Power Failure
Post by: MeWhoElse on February 17, 2012, 06:14:25 AM
Hey all,

Any help would be much appreciated, as there is no "troubleshooting" documentation for these series switches... very annoying.

During a switch move (power off and on) the switch comes up flashing on the power LED after several seconds from power on constantly. The cables connected to the switch ports show no activity nor is there any across the switch.

At first power on, the Power LED and Link/Act links are solid, then shortly after the power continues to blink quickly.

The reset has not made any difference.

Any ideas? Or can someone point me to some hidden documenation of troubleshooting these devices for error codes!

Thanks
Title: Re: DGS-1210-10P Power Failure
Post by: MeWhoElse on February 19, 2012, 04:11:05 AM
All came good again after keeping it switched off for a day!