D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-600L => Topic started by: FurryNutz on December 19, 2012, 10:30:52 AM
-
By default, Traffic Control is disabled as Automatic Bandwidth Control is enabled an thus disables manual Traffic Control Settings.
To enable Traffic Control manual input settings, do the following:
1. Navigate to Manual on the routers initial web page.
2. Navigate to Advanced/Traffic Control.
3. Select the check box next to Enable Traffic Control.
4. Select the check box next to Automatic Distribute Bandwidth and remove the check mark.
5. Save settings.
This should enable the custom input rules at the bottom. Adjust them for your network needs.
(http://i1195.photobucket.com/albums/aa396/furrynutz740il/DIR600LTrafficControl.png)