D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-936L => Topic started by: GreenBay42 on July 10, 2019, 12:53:46 PM
-
Firmware 1.08.03 released.
Firmware - ftp://FTP2.DLINK.COM/PRODUCTS/DCS-936L/REVA/DCS-936L_REVA_FIRMWARE_v1.08.03.zip (ftp://FTP2.DLINK.COM/PRODUCTS/DCS-936L/REVA/DCS-936L_REVA_FIRMWARE_v1.08.03.zip)
Release Notes:
- Change mydlink agent to v2.2.0-b71
- NIPCA CGI change to support digest only
- Disable TLS v1.0, v1.1
- Modify the “GET /common/info.cgi” only response value
-
Installed via iPhone mydlink.app. Installed correctly.
Visible on both iPhone and Android.
NVR-202L is not working after upgrading to v1.08 on the 936L:
(https://i.ibb.co/YXwKnXD/No926-Lafterupdate2v108.png) (https://ibb.co/423Dv2s)
There is no video on the NVR-202L UI for this camera after the upgrade.
ALL other cameras are working.
Live video appears on it's web page in Windows 7x64/IE11x32
Reboot of both NVR and 936L ail to bring video for the 936L.
Selecting Scan Camera in the 202L UI removed the 936L from is Camera List. :(
Similar issue see on different NVR model with this camera:
http://forums.dlink.com/index.php?topic=74938.0 (http://forums.dlink.com/index.php?topic=74938.0)
-
Try resetting the 936L and setup again.
I will need the firmware and revision of the 202L.
-
Agent Version : 2.2.0-b61
Current NVR Firmware Version : v2.05.07
Firmware Date : Jan 7 2019
Current NVR Device Pack : v2.17.02
Device Pack Date : Jan 07 2019
-
Search feature in 202L reports finding the camera and the info is correct. Fills in the data fields. After adding the PW for the camera and selecting ADD, I get a Verification error. Add camera anyway? message. Save is successful. Selecting Live View sees the other two cameras and Connecting..... for the 936L only and no video appears.