D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: tzeller on October 09, 2009, 01:38:21 PM

Title: DFL 210: On/Off Switch?!
Post by: tzeller on October 09, 2009, 01:38:21 PM

Hello everybody,

I just bought a DFL 210 and wanted to install it.
However, the Quick Installation Guide tells me:

Quote

First, connect the power cord to the receptor at the back panel of
the DFL-210 and then plug the other end of the power cord to a
wall outlet or power strip.

Well, no problem.

Quote

Then powered on the DFL-210 using the on/off switch. Now the Power LED will turn ON to indicate
proper operation.

Which on/off switch do they mean? This might sound very stupid, but I really can't find any on/off switch.
When I simply connect it to the power supply the way it is now, the Power LED does not turn on, and the device stays dead.

Thank you for your help.

Title: Re: DFL 210: On/Off Switch?!
Post by: Fatman on October 09, 2009, 04:13:53 PM

There isn't an on and off switch, it sounds like this is a defective switch.