• March 19, 2024, 02:37:42 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Multicast streaming not happening on DES-3552 switch  (Read 7369 times)

Hussainqcs

  • Level 1 Member
  • *
  • Posts: 1
Multicast streaming not happening on DES-3552 switch
« on: October 18, 2018, 08:30:10 AM »

Hi,

I have Dlink DES-3552 on access layer and have Alcatel Lucent as Core switch

All the Source & Clients are in same vlan (vlan id :5) But from Alcatel they have enabled IP Multicast switching and core switches also they can able to see the stream in Alcatel switch But still in the Dlink i was unable to see the stream ?

Any help will be appreciated



#                        DES-3552P Fast Ethernet Switch
#                                Configuration
#
#                           Firmware: Build 2.60.017
#           Copyright(C) 2010 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
 

# STACK


# BASIC

# ACCOUNT LIST
# ACCOUNT END
# PASSWORD ENCRYPTION
disable password encryption
config serial_port auto_logout never


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
enable web 80
enable clipaging
config terminal width 80

# DEBUG


# STORM


# LOOP_DETECT

disable loopdetect

# GM

disable sim

# GM_H


# MIRROR



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
disable mirror

# QOS

enable hol_prevention
config 802.1p default_priority 1-52 0
config bandwidth_control 1-52 rx_rate no_limit
config per_queue bandwidth_control ports 1-52 0 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 1 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 2 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 3 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 4 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 5 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 6 min_rate  no_limit  max_rate no_limit
config per_queue bandwidth_control ports 1-52 7 min_rate  no_limit  max_rate no_limit


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config scheduling_mechanism ports 1-52 strict
config scheduling ports 1-52 0  weight 1
config scheduling ports 1-52 1  weight 2
config scheduling ports 1-52 2  weight 3
config scheduling ports 1-52 3  weight 4
config scheduling ports 1-52 4  weight 5
config scheduling ports 1-52 5  weight 6
config scheduling ports 1-52 6  weight 7
config scheduling ports 1-52 7  weight 8
config 802.1p user_priority ports 1-52 0  2
config 802.1p user_priority ports 1-52 1  0
config 802.1p user_priority ports 1-52 2  1
config 802.1p user_priority ports 1-52 3  3
config 802.1p user_priority ports 1-52 4  4
config 802.1p user_priority ports 1-52 5  5
config 802.1p user_priority ports 1-52 6  6
config 802.1p user_priority ports 1-52 7  7

# SYSLOG

config log_save_timing on_demand
disable syslog
config system_severity trap information


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               

# TRAF-SEGMENTATION

config traffic_segmentation 1-52 forward_list all

# SSL


# PORT

disable jumbo_frame
config ports 1-52 state enable
config ports 1-52 speed auto
config ports 1-52 flow_control disable
config ports 1-52 learning enable
config ports 1-52 mdix auto
config ports 49-50 medium_type fiber state enable
config ports 49-50 medium_type fiber speed auto
config ports 49-50 medium_type fiber flow_control disable
config ports 49-50 medium_type fiber learning enable
config ports 49-50 medium_type fiber mdix auto

# SFLOW


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               


# OAM


# MANAGEMENT

config snmp system_name lan_8th_floor
config snmp system_location 8th floor
disable snmp

# TRAP


# TR


# VLAN

enable pvid auto_assign
config vlan default delete 1-48
config vlan default add untagged 49-52
config vlan default advertisement enable


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
create vlan CCTV tag 2
config vlan CCTV add tagged 49
config vlan CCTV add untagged 5-25 advertisement disable
create vlan Data tag 3
config vlan Data add tagged 49 advertisement disable
create vlan voice tag 4
config vlan voice add tagged 49
config vlan voice add untagged 42-48 advertisement disable
create vlan IPTV tag 5
config vlan IPTV add tagged 49
config vlan IPTV add untagged 26-41 advertisement enable
create vlan BMS tag 6
config vlan BMS add tagged 49
config vlan BMS add untagged 1-4 advertisement disable
create vlan ACS tag 7
config vlan ACS add tagged 49 advertisement disable
disable gvrp
disable asymmetric_vlan
disable vlan_trunk
config port_vlan 1-4 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 6
config port_vlan 5-25 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 2


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config port_vlan 26-41 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 5
config port_vlan 42-48 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 4
config port_vlan 49-52 gvrp_state disable ingress_checking enable acceptable_frame admit_all pvid 1

# PORT_SECURITY

config port_security system max_learning_addr no_limit
disable port_security trap_log
config port_security ports 1-52 admin_state disable max_learning_addr 1 lock_address_mode deleteonreset

# ACL


#CPU Interface Filter

disable cpu_interface_filtering

# SUBNETVLAN



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config vlan_precedence port 1-52 mac_based_vlan

# PROTOCOL_VLAN


# QINQ

config qinq ports 1-52  missdrop disable outer_tpid 0x8100
config qinq ports 1-52  add_inner_tag disable

# RSPAN

disable rspan

# 8021X

disable 802.1x

# guestvlan


# POE



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               

# FDB

config fdb aging_time 300

# VLANCounter


# ADDRBIND


# DHCPV6_SNOOPING


# NetBiosFilter


# RADIUS


# ND_SNOOPING




CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# DhcpServerScreening


# PPPoE


# sRED

disable sred

# ARPSpoofingPrevention


# MEF


# MAC_ADDRESS_TABLE_NOTIFICATION


# STP

config stp fbpdu disable



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# L2PT


# BPDU_PROTECTION

disable bpdu_protection

# SAFEGUARD_ENGINE


# BANNER_PROMP


# SSH


# TELNETS

enable telnet 23

# BCPING




CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# IGMP_MULTICAST_VLAN


# MLD_MULTICAST_VLAN


# SNTP

disable sntp

# MULTICAST_FILTER


# LACP


# IP

config ipif System ipaddress 192.168.0.24/24
config ipif System vlan default
config ipif System dhcpv6_client disable
disable autoconfig



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# SNMPv3


# VOICEVLAN


# ERPS

 disable erps

# CFM

disable cfm

# JWAC


# WAC

 disable wac

# LLDP



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
disable lldp

# MAC-based_Access_Control

 disable mac_based_access_control

# MCFILTER


# COMPOUND_AUTHENTICATION

 enable authorization attributes
 config authentication server failover block

# IGMP_SNOOPING

enable igmp_snooping
config igmp_snooping vlan_name default fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name default query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config igmp_snooping data_driven_learning vlan_name default expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name CCTV fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name CCTV query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name CCTV expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name Data fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name Data query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name Data expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name voice fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name voice query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name voice expiry_time 260 state enable aged_out disable


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config igmp_snooping vlan_name IPTV fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name IPTV query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name IPTV expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name BMS fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name BMS query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name BMS expiry_time 260 state enable aged_out disable
config igmp_snooping vlan_name ACS fast_leave disable report_suppression enable state enable
config igmp_snooping querier vlan_name ACS query_interval 125  max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable version 3
config igmp_snooping data_driven_learning vlan_name ACS expiry_time 260 state enable aged_out disable

# MLDSNP


CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               

disable mld_snooping

# ACCESS_AUTHENTICATION_CONTROL


# DHCP_LOCAL_RELAY

disable dhcp_local_relay

# AAA_LOCAL_ENABLE_PASSWORD


# DHCP_RELAY

disable dhcp_relay

# NDP

config ipv6 nd ns ipif System retrans_time 0

# ARP



CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
config arp_aging time 20
config gratuitous_arp send ipif_status_up disable
config gratuitous_arp send dup_ip_detected disable
config gratuitous_arp learning disable
disable gratuitous_arp ipif System trap
enable gratuitous_arp ipif System log
config gratuitous_arp send periodically ipif System interval 0

# DNSR

disable dnsr

# ROUTE

enable local_route ipv4
disable local_route ipv6

# PROUTE


# DHCP_SERVER




CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All                     
                                                                               
# RELAY6

disable dhcpv6_relay

#-------------------------------------------------------------------
#             End of configuration file for DES-3552P
#-------------------------------------------------------------------



Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Multicast streaming not happening on DES-3552 switch
« Reply #1 on: October 18, 2018, 11:35:35 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.