Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Have you loaded this v1.00B24 to see if it resolves this problem?

i've made some tests, the NAT problem seems to affect only the pppoe connection.
if i use a static ip for wan with 2 pc the NAT speeds are around 900mbit

[TheIceMan]

yes , i did install v1.00B24, doesn't fix the problem.
i installed all the firmware that i could find on any dlink ftp, nothing.

i am trying to find v1.03B01, this has the pppoe fix.

Firmware: DIR865LA1_FW103B01.bin Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac) Date: 2012/10/22

Problems Resolved:

   Add pppoe/PPTP/L2TP NAT acceleration.
    Fix mdns packet(multicast packet) lose in 2.4G after several hours.
    After download config setting, then change setting and reboot. The management username/password will change to default(admin/blank).
    Add mydlink API error check in wifi security setting.
    [IPV6] Solve the problem that after setting IPv6 to PPPoE with create a new session, IPv4 Internet connection is changed to last time mode.
    [IPV6] Solve the problem that while setting IPv6 to share with IPv4, DNS settings cannot be modified and the warning message is displayed.
    [IPv6]Modify the behavior of dhcp6c as follows:

    a. At first, we use ::/56 for default pd hint.
    b. Then we use the last time pd hint if the connection is reconnected.

[FurryNutz]

I see v1.03 B02 listed here:
http://tsd.dlink.com.tw/downloads2008detailgo.asp

Let us know how it works...

[TheIceMan]

i tryed that right now, the problem remains the same, is there a way that we can get in touch
with the people that make the firmware ?

[FurryNutz]

For your region I'd try this site and contact someone on the phone there:
http://www.dlink.ru/ua/

Let us know how it goes.

FYI, this model has been phased out so I'm not sure if you'll get any help with it.

There is GPL code for it though...

[TheIceMan]

i am making right now a virtual machine with linux to take a look at the code

[FurryNutz]

Keep us posted please

[TheIceMan]

first build

-----------------------------------------------------
Image file   : DIR865LA1_FW100b24_e47n.slt
Signature    : wrgac01_dlob.hans_dir865
Build number : e47n
-----------------------------------------------------

[FurryNutz]

What I think you need to do is to use this version, then also extract the v1.03 files and put them into the v1.00 GPL code and rebuild. I've asked a forum member to have a look at this and see if he can help you take a look at this.

You might down load the v1.06 GPL so your using the last GPL version, then incorporate the v1.03 PPPoE fixes into it and rebuild. If this can be done.

[TheIceMan]

-----------------------------------------------------
Image file   : DIR865LA1_FW106SHCb07_e47n.slt
Signature    : wrgac01_dlob.hans_dir865
Build number : e47n
-----------------------------------------------------

build online , just have to find the pppoe parameter now 

[FurryNutz]

Keep us posted...if this works, my ask you to build a WW version and a NA version.

Let us know...

[TheIceMan]

the ctf module was remove in this version, still looking how to enable it.

Firmware: DIR865LA1_FW104B05.bin Hardware: wrgac01 (bcm4706+bcm4331 11gn + bcm4360 11ac) Date: 2012/12/17

Problems Resolved:

    remove ctf pppoe/pptp/l2tp support, because can not pass bt test

[FurryNutz]

Keep us posted...

[FurryNutz]

Any status on this? 

[TheIceMan]

i decided not to waste any more time on this, i returned the dlink 865l and i got a tp-link wdr3600.
its has lower specs, only 300mbit on 2.4 and 5.0, but NAT work fine around 940 mb/sec and i can do
with wireless N for now, i have only one AC device, my phone.

i am really sorry for the d-link router, i had a 855 before 865L and it worked 5 years with no flows.

regarding the broadcom module that enables hardware nat its not open source, i couldn't find anything
helpful so i ended the search. one thing i can tell you, nobody that makes custom firmwares has this
feature running, so the only way to get support is from the manufacture.