D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-930L => Topic started by: gallelo on October 10, 2016, 10:40:46 AM

Title: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 10, 2016, 10:40:46 AM
I have 2 930L camera (H/W A). And I downloaded the latest firmware and setup programs. I was able to setup 1 of the 930L and added to mydlink account. However, the 2nd one gave me trouble. I finished the first 2 stages in the setup process and stuck at "Enable mydlink services". Since I added 1 camera already, I provided the login information for mydlink.com account. But there is no response at all when I click "Next" button and seems it didn't take any action...

Please help. The camera was working fine when using IP address to access. Just can't add to mydlink so I can't access from outside the LAN. Thx
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on October 10, 2016, 10:51:02 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


What Mfr and model is the main host router?
What wireless modes are you using?

You might try turning OFF the 1st camera and leaving it offline. Then try doing a factory reset on the 2nd camera and set it up and see if you can get it connected correctly with the service. Use the most current SW installation package from the service support site. If you get the camera connected, then turn on the 1st camera.

Also:
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.93 and .94 DHCP (http://forums.dlink.com/index.php?topic=58017.0)

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com (http://forums.dlink.com/index.php?topic=62395.0)
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: TelfordPa on October 10, 2016, 11:47:42 AM
download and install  the FW 1.14 that's what you had before the 1.15........ if you add 1.14 back you will be able to add the camara back to the online account......same thing happened to me
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on October 10, 2016, 12:16:30 PM
Lets see if the user can get the 2nd camera installed before downgrading FW. He was able to get the other installed and set up.

download and install  the FW 1.14 that's what you had before the 1.15........ if you add 1.14 back you will be able to add the camara back to the online account......same thing happened to me
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 10, 2016, 01:50:26 PM
1st camera is on 1.15 (latest). 2nd camera was on 1.14 and couldn't add to account. I upgraded 2nd also to 1.15 now and couldn't add to mydlink account neither. Tried already uPNP and uPNP port fowarding and seems no effect.

I will try turn off 1st camera. But I do remember I tried 2nd camera without 1st camera also...
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 10, 2016, 01:51:36 PM
Main host router is Apple airport router.
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 10, 2016, 01:52:07 PM
DCS-930L H/W version A3
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 10, 2016, 01:52:49 PM
Region: california
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on October 10, 2016, 02:13:33 PM
Ok, thanks for posting. Let us know how it goes. If one added ok, the other should be added as well.
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 10, 2016, 09:59:15 PM
No luck in adding to mydlink account by removing the 1st camera...
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on October 11, 2016, 07:27:15 AM
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 14, 2016, 09:56:39 AM
Talked with tech support but didn't get issue solved. Case # C6923939
Can't connected to mydlink server or the setup wizard no response at "Enable mydlink services" stage.
Waited after the mydlink server maintainence. Problem still the same. Guess I will gave up on this product.
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on October 14, 2016, 10:29:20 AM
The only other thing I an think of to try is to remove the one camera that's associated with the MDL service. Then try installing the one that hasn't been associated and see what happens.
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: gallelo on October 17, 2016, 12:13:30 AM
Tried to remove the 1st camera and add the 2nd one but still same issue. 2nd camera can't added even there is no camera registered under my account.
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on October 17, 2016, 07:01:56 AM
Can you get the 1st camera installed and associated?

I'll pass this on to D-Link for review. Somethings not working here.  ::)
Title: Re: Stuck at "Enable mydlink Services" stage during setup
Post by: FurryNutz on November 10, 2016, 12:35:00 PM
Wondering if this might help?
http://forums.dlink.com/index.php?topic=65878.0 (http://forums.dlink.com/index.php?topic=65878.0)