• November 23, 2017, 08:53:24 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: D-LINK DIR 860L REV. B1 - WPA2 only  (Read 943 times)

betesi

  • Level 1 Member
  • *
  • Posts: 1
D-LINK DIR 860L REV. B1 - WPA2 only
« on: January 05, 2017, 02:41:01 PM »

Recently, I became "happy" owner of the router D-LINK DIR 860L REV. B1
--- MediaTek MT7621AT
--- 128 MiB RAM
--- AC SmartBeam
--- 1200 802.11ac Dual Band
--- MT7612E 802.11an + ac
--- MT7602E 802.11bgn

I did not expect to run into problems in "native" firmware after the purchase of a router.
The firmware in the router - (!) V2.03, while for D-LINK DIR 860L REV. A1 (Broadcom BCM47081A0) - somehow version 1. *
I have not seen anywhere before purchasing the router information about the firmware version, and was convinced that I would see the standard firmware v1. *

As a result, I have researched the installed firmware and discovered the following: in the settings of wifi access points in encryption, there is no point "WPA2 only" and a lack of choice Cipher type (AES)! Available only WPA / WPA2 mode. And, on the firmware version 1. * this is all right.

What a strange thing !? This is something impossible for the router? I could never have thought that this functionality may not be available in modern routers.
Please help me with this mistake made by D-LINK router in relation to this.

How to activate encryption "WPA2 only" and Cipher type - AES?
Can it be done, for example, via telnet or edit the configuration file ...?
Or maybe there is a possibility to install a router REV. B1 firmware version 1. *?
I would be very grateful for the help.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43684
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: D-LINK DIR 860L REV. B1 - WPA2 only
« Reply #1 on: January 05, 2017, 04:42:21 PM »


  • What region are you located?

This Rev has the new simplified UI, thus the handling of security is mostly automatic. I presume selecting WPA2 Personal will be the recommended setting.

You can not load Rev A FW on a Rev B router or vs versa. Different HW.
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting