• July 20, 2017, 01:46:35 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-810L Power Button on Amber Light  (Read 2454 times)

Turnable

  • Level 1 Member
  • *
  • Posts: 3
DIR-810L Power Button on Amber Light
« on: April 10, 2015, 09:35:30 PM »

Title explains it all. I attempted to update my router firmware with this: http://forums.dlink.com/index.php?topic=60567.0 while on ethernet, and then after about 100 seconds in, my internet crashes and the light turns amber. The globe is completely blacked out though. Any ideas on how to fix?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 42545
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DIR-810L Power Button on Amber Light
« Reply #1 on: April 13, 2015, 07:38:04 AM »

Link>Welcome!

  • What region are you located?
  • Has a Factory Reset been performed?
  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process[/b][/url]
  • Was the router working before any firmware updates?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
  • Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
  • What ISP Modem service link speeds UP and Down do you have? Link> Speed Testing Sites
  • Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 42545
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DIR-810L Power Button on Amber Light
« Reply #2 on: July 10, 2015, 08:55:02 AM »

Any status on this?  ???

Title explains it all. I attempted to update my router firmware with this: http://forums.dlink.com/index.php?topic=60567.0 while on ethernet, and then after about 100 seconds in, my internet crashes and the light turns amber. The globe is completely blacked out though. Any ideas on how to fix?
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

Turnable

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-810L Power Button on Amber Light
« Reply #3 on: July 16, 2015, 07:52:07 PM »

Any status on this?  ???

Title explains it all. I attempted to update my router firmware with this: http://forums.dlink.com/index.php?topic=60567.0 while on ethernet, and then after about 100 seconds in, my internet crashes and the light turns amber. The globe is completely blacked out though. Any ideas on how to fix?
I completely forgot about this problem. But yeah, I can't figure out anything regarding firmware and status of the router because it wont turn on. When I plug it in, all it shows is an amber power light along with a blacked out globe.

My company im under is Time Warner Cable, and I have an Arris TG862 Modem/Router combo. Nothing works with this router, and I really don't know how to fix it. I am located on the east Coast of the U.S, New York.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 42545
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DIR-810L Power Button on Amber Light
« Reply #4 on: July 17, 2015, 07:01:55 AM »

Try upgrading the FW with out the 810L connected to the ISP modem. Download the FW file to a wired PC first, Then follow this:
Link> >FW Update Process

One issue maybe is that your ISP modem is already a router as well:
  • If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. Call the ISP and ask to see if the ISP modem can be bridged. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
    Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on a Router
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

Turnable

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-810L Power Button on Amber Light
« Reply #5 on: July 17, 2015, 09:13:25 AM »

Try upgrading the FW with out the 810L connected to the ISP modem. Download the FW file to a wired PC first, Then follow this:
Link> >FW Update Process

One issue maybe is that your ISP modem is already a router as well:
  • If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. Call the ISP and ask to see if the ISP modem can be bridged. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
    Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on a Router
Ok, i got the router to work. Now, a new problem occurs. The connection dips for about 1 minute.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 42545
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DIR-810L Power Button on Amber Light
« Reply #6 on: July 17, 2015, 09:29:06 AM »

If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. Call the ISP and ask to see if the ISP modem can be bridged. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Turn off all filters and firewalls on the modem.


Toy might try this for the 810L:
Turning a router into an AP.
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting