• November 21, 2017, 06:01:22 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: DD-WRT and OpenWRT available for DIR-810L  (Read 22397 times)

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
DD-WRT and OpenWRT available for DIR-810L
« on: January 28, 2015, 08:08:53 PM »

I made the mistake of flashing DD-WRT's beta firmware on the DIR-810L.   I tried it for a day; it was okay.  There was no way to flash back or proceed to openwrt firmware from the web menu.   I succeeded in getting openwrt's chaos calmer installed by removing 4 screws and attaching a 3.3v serial cable with pogo pins to the serial port in the corner.  The serial console command 'mtd erase linux ' was executed successfully, prompting a novel U-Boot prompt to ask for a firmware file.  TFTPD32 from http://tftpd32.jounin.net/ helped upload the openwrt firmware to the DIR-810L.  I have been enjoying chaos calmer on the DIR-810L for 4 days now.
Logged

KoCMoHaBTa

  • Level 1 Member
  • *
  • Posts: 3
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #1 on: February 01, 2015, 09:13:39 AM »

There is actually pretty easy way to revert from DD-WRT - just hold the reset button for 30 seconds and you are in recovery mode, from where you can upload the stock image. Ofc the recovery mode does not provide DHCP, so you have to set your IP statically.
It is the same procedure with other D-Link routers, like DIR-615.

How did you manage to flash openWRT?
Is there an easy way that does not include making the USB port?
Can i just flash trough the web interfac, like DD-WRT?
Other peoples are saying that Wi-Fi is not working with openWRT, how did you manage to setup yours?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #2 on: February 01, 2015, 11:38:50 AM »

I recommend referring to the DD-WRT web site for help and information regarding WRT FW and processes.
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #3 on: February 02, 2015, 12:18:09 PM »

OpenWRT wifi worked on the Jan.23 image for the DIR-810L, for the 2.4 GHz band only.  Jan.31 and Feb.02 firmware image of openwrt did not have working AP mode, only client mode.  From dd-wrt to openwrt, dd-wrt firmware upgrade menu won't accept the openwrt image, so the serial cable is needed.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #4 on: February 02, 2015, 12:54:39 PM »

Can the OEM FW be re-installed then go to OpenWRT with out the use of a serial able?  ???
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

KoCMoHaBTa

  • Level 1 Member
  • *
  • Posts: 3
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #5 on: February 02, 2015, 01:49:14 PM »

They dont have a factory image provided. Factory images are used for flashing from stock firmware. There is only sysupgrade image (for upgrading from older version of openWRT), for whcih the only way to flash it over the stock is trough the serial port. I'm not aware for other methods of flashing sysupgrade images.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #6 on: February 02, 2015, 01:59:51 PM »

Just curious if this feature can be used to get OEM FW installed?  ???
 Emergency Recovery Mode
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #7 on: February 04, 2015, 10:27:43 AM »

Haven't tried it yet, but Luci web firmware page should have no restrictions for flashing back to OEM D-Link FW,  if I want AC750 Wifi restored.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #8 on: February 04, 2015, 10:33:07 AM »

Please check to see if that process works, if D-Links base boot loader is in tact, then maybe that can be used to install OEM FW back on to the router. Then go from there.

Let us now how it goes...
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #9 on: February 05, 2015, 07:46:41 AM »

After flashing from OpenWrt to DIR810LA1_FW102B22.bin, default IP was 192.168.1.1, default password was not admin.  The top line of the D-Link start page includes: Hardware Version: A1     Firmware Version: 1.02   
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #10 on: February 05, 2015, 08:31:50 AM »

Did you use the Recovery process? default IP address should be .0.1 and blank for admin PW...
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #11 on: February 05, 2015, 07:29:15 PM »

I left the 'save settings' box unchecked in the Luci firmware update menu.  If settings were saved, the router's IP would have been 192.168.81.1 .  The pppoe name and password also were filled in and working.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #12 on: March 23, 2015, 08:23:01 AM »

Were you able to get this working?  ???
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #13 on: March 25, 2015, 02:11:01 PM »

The box doesn't have to be opened to get OpenWrt installed.   Just install the dd-wrt  custom trailed firmware before flashing the openwrt upgrade image.  When Chaos Calmer enters beta, I'll try it again; it would be nice to retain AC750.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DD-WRT and OpenWRT available for DIR-810L
« Reply #14 on: March 25, 2015, 02:15:27 PM »

Just curious if you got it working again. Ya, you shouldn't have to open the case. Recovery mode can be used to put OEM FW back on I believe.

Good Luck
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: [1] 2