D-Link Forums

D-Link Enterprise => DGS-1100-Series => Topic started by: phantung83 on January 20, 2019, 11:38:26 PM

Title: How to configure DGS-1100-08P for multi VLAN (SSID) of DAP-2230?
Post by: phantung83 on January 20, 2019, 11:38:26 PM

Hi all,

I have two DGS-1100-08P switches, and 10 DAP-2230 Access Point (AP).

Each DAP-2230, I have 2 SSID: Employee (VLAN 102: 192.168.102.0/24) and Guest (VLAN 2: 192.168.2.0/24).

I configured in my Router for DHCP Server with 2 pools (192.168.102.0/24 and 192.168.2.0/24). If I directly connect DAP-2230 to my router, they work well.

https://drive.google.com/open?id=1fNblOGYXG_lOwrgzJnOsPoWLni511jQZ (https://drive.google.com/open?id=1fNblOGYXG_lOwrgzJnOsPoWLni511jQZ)

How do I configure DGS-1100-08P for multi-VLan (SSID) of AP to get get IP address from my router for each SSID of AP?

Thanks so much.
PhanTung

Title: Re: How to configure DGS-1100-08P for multi VLAN (SSID) of DAP-2230?
Post by: lopipoo88 on July 01, 2019, 12:47:50 AM

I have the same problem ?
Do you find any solution ?