• March 28, 2024, 03:38:03 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR 600l setup  (Read 7869 times)

sumanhit

  • Level 1 Member
  • *
  • Posts: 2
DIR 600l setup
« on: March 19, 2013, 08:36:01 PM »

I have BSNL broadband ADSl Modem with Bridge Type Connection..that means I have to dial every time to conncet to the internet with given Username Password by ISP..Now Can Anybody help me to configure my DIR-600L with this modem keeping the connetion type same..Means I dont wanna change my Modem to PPPOE mode..

The Router is working fine when the modem is in PPPOE mode..But the problem is I have Limited Usage Conncetion.In pppoe mode if router kept on some usage automatically gets charged which I dont want..
I wanna keep my modem as in the bridge mode..and want to conncet the router to make the conncetion wireless and so that I can put ISP's username password from whereever I want to conncet(e.g.-Laptop,Tablet,Desktop)..Pls sm1 help with the router config fr the same..Thank you.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 600l setup
« Reply #1 on: March 20, 2013, 07:36:12 AM »

Link>Welcome!
What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on routers web page under status.
What region are you located?
Are you wired or wireless connected to the router?

What ISP Modem Mfr. and model # do you have?

I think all you need to use on the router is the following: Setup/Internet/Manual/Connection type: PPPoE and input acct and Password. Select Always ON. Save settings and reboot the router.

Power Off the 600L and ISP modem. Wired LAN cable should be connect on the internet port on the modem to the Yellow Internet port on the 600L. Power ON the Modem and wait 30 seconds, then power ON the 600L. Your PC should be wire LAN connected to the Black LAN ports on the 600L. The Internet globe or light on the 600L should eventually turn green.

Check Internet on the PC.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

sumanhit

  • Level 1 Member
  • *
  • Posts: 2
Re: DIR 600l setup
« Reply #2 on: March 20, 2013, 10:35:15 AM »

But the thing is as I mentioned I dont wanna keep my router always on..I want a wifi connection whenever I need from any WIFI devices(e.g.-Laptop,Tablet)..I want a setup so that whenever I need wifi I can connect the internet that time using username password and also disconnect it after my need is over..
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR 600l setup
« Reply #3 on: March 20, 2013, 12:35:54 PM »

Use the ON Demand option under RECONNECT MODE under the PPPoE Connection type section.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.