D-Link Forums

D-Link Wireless Routers for Home and Small Business => Information => Archive => Topic started by: annhltr on May 28, 2010, 07:15:57 AM

Title: DIR-600 - VPN problem and solution
Post by: annhltr on May 28, 2010, 07:15:57 AM

Using WinXP, Cisco anyconnect VPN client here.
Problem: VPN doesn't connect / Connects but "actually" not connected.

Setting to be done on the router:
Here are the steps. Step 1 is probably not needed but I am posting it just in case. Only Step 2 should fix it.

[1] Go to advanced tab > Advanced Port Forwarding Rules (http://192.168.0.1/adv_port.php) and configure like this: http://i.imgur.com/TVeIU.png (http://i.imgur.com/TVeIU.png) ; Click save settings.
[2] Now go to FIREWALL & DMZ SETTINGS (http://192.168.0.1/adv_firewall.php) and configure like this: http://i.imgur.com/5Uvyd.png (http://i.imgur.com/5Uvyd.png) (1st 2 entries are present if you've done step 1, the 2rd entry has to be done manually); Click save settings.

Tadaa!  :D

Note: It's UDP-443 with Anyconnect, maybe a different port for a different VPN client. Find that and configure accordingly.

Reply back if this worked with anybody else.

Title: Re: DIR-600 - VPN problem and solution
Post by: surfer80 on September 05, 2010, 03:56:56 PM

Thank you! Just what I needed. Using anyconnect aswell

Title: Re: DIR-600 - VPN problem and solution
Post by: ubentou on December 05, 2010, 02:37:21 AM

 :) just register new user and login to say thank you!
This issue trouble me nearly half  a year.
Thanks again!