D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2210 => Topic started by: mrneutron on April 03, 2015, 12:17:19 PM
-
Just received a new DCS 2210 POE camera. Plugged it in, went through the settings, upgraded the firmware to 1.22 but the IR isn't working at all.
I was trying to use it on POE and have since moved to the adapter and still no luck. Gone through all the settings and cannot see anything set incorrectly.
Don't know what else to try except returning it
Anyone have any thoughts? I'd love to talk to D-link support but paying for support on a day-0 device is beyond ridiculous.
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded?
- What region are you located?
if this is a new camera, phone support should be free usually...
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded?
- What region are you located?
if this is a new camera, phone support should be free usually...
Located in Massachusetts, firmware is 1.22.00
Just did a factory reset and still no IR
-
Did you try to contact D-Link support already?
The unit maybe faulty and just needs to be replaced...Ask for an RMA.
-
Just received a new DCS 2210 POE camera. Plugged it in, went through the settings, upgraded the firmware to 1.22 but the IR isn't working at all.
I was trying to use it on POE and have since moved to the adapter and still no luck. Gone through all the settings and cannot see anything set incorrectly.
Don't know what else to try except returning it
Anyone have any thoughts? I'd love to talk to D-link support but paying for support on a day-0 device is beyond ridiculous.
Have you logged into the f/w page?
Advanced -> ICR & IR ->
There are options there, you might be on "OFF".
IR LIGHT
IR Light Control
Off
On
Sync. With ICR
Schedule
IR Light Control On(24hr)
-
Thanks for the info. The user hasn't been back since this posted this a year ago. I hope your info will be good for any future users though. ;)
Just received a new DCS 2210 POE camera. Plugged it in, went through the settings, upgraded the firmware to 1.22 but the IR isn't working at all.
I was trying to use it on POE and have since moved to the adapter and still no luck. Gone through all the settings and cannot see anything set incorrectly.
Don't know what else to try except returning it
Anyone have any thoughts? I'd love to talk to D-link support but paying for support on a day-0 device is beyond ridiculous.
Have you logged into the f/w page?
Advanced -> ICR & IR ->
There are options there, you might be on "OFF".
IR LIGHT
IR Light Control
Off
On
Sync. With ICR
Schedule
IR Light Control On(24hr)
-
Thanks for the info. The user hasn't been back since this posted this a year ago. I hope your info will be good for any future users though. ;)
Just received a new DCS 2210 POE camera. Plugged it in, went through the settings, upgraded the firmware to 1.22 but the IR isn't working at all.
I was trying to use it on POE and have since moved to the adapter and still no luck. Gone through all the settings and cannot see anything set incorrectly.
Don't know what else to try except returning it
Anyone have any thoughts? I'd love to talk to D-link support but paying for support on a day-0 device is beyond ridiculous.
Have you logged into the f/w page?
Advanced -> ICR & IR ->
There are options there, you might be on "OFF".
IR LIGHT
IR Light Control
Off
On
Sync. With ICR
Schedule
IR Light Control On(24hr)
I think I mentioned in my other post, I have a 2210L POE... so could be off..
-
I presume either Mr N has this resolved or has moved on. ::)