• March 28, 2024, 09:23:39 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNR-322L stays in no recording with 3 DCS-2210 scheduled  (Read 12167 times)

ramossi

  • Level 1 Member
  • *
  • Posts: 6
DNR-322L stays in no recording with 3 DCS-2210 scheduled
« on: January 22, 2015, 06:22:03 AM »

hi all  :)
i just installed a DNR-322L NVR and upgraded the firmware to 2.10
i connected 3 DCS-2210 and upgradedthem to : 1.22.00
i recorded the passwords for the 3 cams, when i go on "live" menu i just have todouble click a cam to see it
i scheduled also under "setup/recording schedule" the 3 camslike that
Start Time End Time Record Audio
00:00 24:00 Always Enabled

but... nothing... status is always "no recording" for the 3 cams...

Have i missed something ?  :-\
Logged

AGDunn

  • Level 1 Member
  • *
  • Posts: 1
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #1 on: January 28, 2015, 06:05:45 AM »

I had exactly the same issue when I installed the system and then upgraded to V2.10. I went back to a prior version but it was the same - no recording.
I then went back to V2.10, reset to factory settings and re-ran the wizard, configured the cameras and it woks fine now.
So, I suspect the solution is to reset to factory defaults after the new firmware is installed.
I'm not sure if you do a restore from a save configuration, that it will work, as mine is a new system.
Good luck
Logged

ramossi

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #2 on: January 29, 2015, 07:14:06 AM »

ok...i ll try next Thursday and put the result here... THX!!  :)
Logged

ramossi

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #3 on: February 05, 2015, 04:59:59 AM »

well... i think we have a real BIG BUG here...  :(
in fact, with the help of "AGDunn", i managed to get a "recording manually" just after a factory reset (and adding the passwords for the 3 cams) but whenever i try to schedule under "setup/recording schedule" it stops immediatly recording  :(

to sum up... i have to let "no recording" on the menu "setup/recording schedule" for my NVR to record (no joke...) >:(

is someone working on the firmware of the DNR-322L ?
can we report this BUG somewhere ?

i installed this brand new system, 900 euro TOTAL (!!) without counting my work hours... and i have to debug it ??

i also work for several other companies in IT... do i have to recommend another brand for the next system i ll be told to install ?  :-\
Logged

ramossi

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #4 on: March 05, 2015, 04:32:51 AM »

is there someone from dlink here ?  ::)
Logged

msaum

  • Level 1 Member
  • *
  • Posts: 8
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #5 on: March 14, 2015, 05:07:30 PM »

I'm still having issues with mine.  It hasn't recorded for over six months.  I'm about ready to throw out the system and buy something else.

The cameras are fine.  But if I can't rely on the NVR to actually record, what good is it?  When I had a prowler at my back door, I wanted to show the police the video of my confrontation with him.  Oops, no video, sorry.

I feel like D-Link is developing and marketing new products, but they're not active on their support or even making their products work as advertised.

Mark
Logged

msaum

  • Level 1 Member
  • *
  • Posts: 8
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #6 on: March 15, 2015, 05:56:20 AM »

Here's another update.  I reset the DNR-322L to factory again using the wizard.  The cameras came up and started recording.  Good news!

The bad news is that they all stopped recording by the morning.  No change in settings, they still showed connected, but had switched to "Not recording".

The DNR-322L is on the latest firmware.  All cameras are on the latest firmware.  This is not and has never been a stable and reliable platform.

Mark
Logged

ramossi

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #7 on: April 02, 2015, 06:10:02 AM »

thank you for your answer mark...
when you say :
"I feel like D-Link is developing and marketing new products, but they're not active on their support or even making their products work as advertised."
wel...now i have exactly the same feeling  :(

the only problem for DLINK is that i installed this buggy expensive system for one of the biggest enterprise in social network in europe  ;D
and when i will tell to the boss here... may be we will summarize this story on twitter /facebook etc...  ;D
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #8 on: May 18, 2015, 07:25:00 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

hofmar

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #9 on: April 11, 2019, 11:11:49 PM »

Hello everybody,

Unfortunately, I have the same mistake.
Could someone solve the problem?

Regards
Markus
Logged

hofmar

  • Level 1 Member
  • *
  • Posts: 6
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #10 on: April 23, 2019, 12:50:59 AM »

Hello everybody,
For me, I finally got it now. By default, the recording appears to be on manual recording. You can configure a time response, but unfortunately this only starts when you press the recording button in the web gui on the "Live Video" tab (see manual version 2.10 on page 77). This ends manual recording and the DNR-322L works according to the configured schedule.

At least it helped me and the recording works now.

Regards,
Markus
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DNR-322L stays in no recording with 3 DCS-2210 scheduled
« Reply #11 on: April 23, 2019, 06:44:54 AM »

Glad you got it working. Thanks for letting us know.
Enjoy.  ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.