• January 21, 2022, 07:26:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNS-325 - HDD Configuration Issue  (Read 2477 times)

dbasco

  • Level 1 Member
  • *
  • Posts: 3
DNS-325 - HDD Configuration Issue
« on: May 09, 2014, 12:38:05 PM »

I made all the 4TB HDDs red so they stand out (i.e. easier to see on the list).

I just bought it and installed the disks. I have firmware 1.03. Even though I can select RAID 1 it sets up two separate 4TB volumes. One on each disk. Any tips/clues?

Thank you.
« Last Edit: May 09, 2014, 01:58:45 PM by JavaLawyer »
Logged

JavaLawyer

  • Poweruser
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: DNS-325 - HDD Configuration Issue
« Reply #1 on: May 09, 2014, 01:58:30 PM »

My first question to you is whether the DNS-325 is intended as a primary storage and backup. If that's the case, then RAID-1 is not the best choice.

Please see the following threads:

As far as the RAID-1 configuration is concerned, first log into the web UI and navigate to MANAGEMENT > System Status > System Info > Volume Information. How many volumes are listed? What is the Volume Type for the volume(s)?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

dbasco

  • Level 1 Member
  • *
  • Posts: 3
Re: DNS-325 - HDD Configuration Issue
« Reply #2 on: May 09, 2014, 10:13:55 PM »

My need is for redundancy. I backup to the cloud.

Also I have updated to 1.04.

The info shown is the following:

Volume Name   Volume_1
Volume Type   Standard
Total Hard Drive Capacity   3665.59 GB
Used Space   196 MB
Unused Space   3665.4 GB
 
Volume Name   Volume_2
Volume Type   Standard
Total Hard Drive Capacity   3665.59 GB
Used Space   196 MB
Unused Space   3665.4 GB
 
Logged