Topic: Limited Access (Read 14191 times)

jpk100 · « **on:** July 16, 2012, 12:31:36 PM »

I installed my D-Link DWA-130 onto my window 7 computer and connected to my wireless connection but it always says 'Limited access' or 'No network access'. Does anyone have an idea what the problem is?

FurryNutz · « **Reply #1 on:** July 20, 2012, 11:03:34 AM »

What wireless modes are you using on the host router?
Try single mode G or N or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.
Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?

D-Link Forums

News:

Author Topic: Limited Access (Read 14191 times)

jpk100

Limited Access

FurryNutz

Re: Limited Access