D-Link Forums

The Graveyard - Products No Longer Supported => Hubs and Switches => DES-1228 => Topic started by: Sunrise458 on October 01, 2013, 04:59:20 AM

Title: Need help with DES-1228/ME
Post by: Sunrise458 on October 01, 2013, 04:59:20 AM
hi! I have a trouble with 802.1x authentication using DES-1228/ME.
Boot PROM Version  : Build 2.00.001
Firmware Version   : Build 2.60.B002
Hardware Version   : B1
Radius server clear session after 24 hours of connection, switch send re authenticate requests every 3000 seconds  
First 24 hours all works good, but then something goes wrong until user reconnect cable/config 802.1x init port_based/config 802.1x reauth port_based/reboot or something else.

Code: [Select]
Command: show auth_session_statistics ports 23

Port number  : 23

SessionOctetsRx                   21263125738
SessionOctetsTx                   19114772633
SessionFramesRx                   28585776
SessionFramesTx                   24278917
SessionId                         ether23_353-7
SessionAuthenticMethod            Remote Authentication Server
SessionTime                       86392
SessionTerminateCause             PortAdminDisabled
SessionUserName                   test
In radius log i see "error-msg: Port-Disabled" and session goes down.
Des 3026(FrmVer 4.30.B05 rev. A3), des 3028(FrmVer 2.10.B10 rev. A2) and des 3200-28(FrmVer 4.00.024 rev. c1) works good and they can re-authenticate users automatically.
Tnx for your time. 8) Sorry if this post in the wrong place