D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-933L => Topic started by: omnigear on September 26, 2018, 12:22:03 PM
-
I cant seem to find the proper configuration to get my 933l to connect to my nvr. what is this camera's setting needed to make it work with my nvr?
(https://i.imgur.com/vLmu6wH.png)(https://i.imgur.com/8ztnBHs.png)(https://i.imgur.com/fDCg9NU.png)(https://i.imgur.com/FymDJbo.png)
-
I do not believe the DCS-933L supports RTSP. Change the port to 554 to test.
If that does not work, can you change the protocol on the laview to http and use port 80?
-
no luck :9
-
Under protocol on your LaView you selected ONVIF. This camera does not support it. Do you have a "generic" protocol to select?
-
custom setting (https://i.imgur.com/FymDJbo.png) is the only other recourse outside of the onvif.
Under protocol on your LaView you selected ONVIF. This camera does not support it. Do you have a "generic" protocol to select?
-
Possible that the NVR is not compatible with the 933L. I know my NVR-202L is. Also D-View Cam software from D-Link is as well...Something to try.