D-Link Wireless Access Points For Business > DAP-2310
dap-2310
(1/1)
randymanchester:
I'm having an issue getting internet access using a DAP-2310 WAP with my samsung galaxy tab 2. I can get access from my ipad and iphone so I know it's working somewhat correctly.
The device connects and gets an IP but then says that the website is not available. I can ping the device on the network.
The firmware is 1.5
Thanks
FurryNutz:
Link>Welcome!
* What region are you located?
Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion
* Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under
* What wireless modes are you using?
* 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
* Channel Width set for Auto 20/40Mhz or try 20Mhz only.
* Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
* What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
Navigation
[0] Message Index
Go to full version