D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-601 => Topic started by: BluRayDisc on August 09, 2014, 09:55:37 AM

Title: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 09, 2014, 09:55:37 AM
DIR-601
[/color]

I have been trying to port forward my mc server but it doesn't work. i have not yet found a solution
please help me out
[/color]
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 10, 2014, 10:08:17 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)



Internet Service Provider and Modem Configurations


Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 11, 2014, 08:37:45 AM
What Hardware version is your router? 2.00 NA
What Firmware version is currently loaded?(http://i.imgur.com/0zMbvzS.png) 2.00NA
What region are you located? Middle Atlantic States New Jersey
Are you wired or wireless connected to the router? Wired

Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL? Cable Comcast
What ISP Modem Mfr. and model # do you have?
ARRIS
Model: WBM760A
P/N: TC00DED760
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 11, 2014, 08:50:06 AM
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.
Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules.
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 11, 2014, 10:23:16 AM
Let me know if you have disabled uPnP after setting up your PF rules.
What values are you using for PF rules? Post a picture of that section please.

Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 12, 2014, 11:25:08 AM
Can You Teamview My Computer and do it i dont know how to do it
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 12, 2014, 11:32:12 AM
Send me a PM with the ID and PW. Please be wired to the back of the router with a wired PC please.

Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 12, 2014, 11:43:24 AM
okay i sent you the msg and i m in a weird Desktop Windows 7
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 12, 2014, 12:47:49 PM
Thank You so much furryznutz
for giving a solution and how to active the port
Title: Re: DIR-601 Port-Forward Not working Please Help ME (RESOLVED)
Post by: FurryNutz on August 12, 2014, 01:00:28 PM
Glad to help out. Enjoy now.  ;)