Hello all,
I've got the camera yesterday, upgraded to latest firmware v1.03.03 and tried to set it up.
I was testing it around 10ft from the router and 30ft from the router on 2.4Ghz band.
My router is ASUS RT-AC68U, wireless mode set to Auto, 20Mhz channel bandwitch, WPA2-Personal, AES encryption and channel manually set to 11.
The only other router I can pickup with Wi-fi scaner is on channel 6, so no interference from it.
Camera is set to static IP outside of DHCP range.
Issues I've discovered so far:
If my router has channel selection set to Auto then the camera will never reconnect if router decides to change channel unless I power cycle the camera. Tested with camera standing 10ft from the router in straight line with no obstacles, full signal strength.
If I reboot the router camera will not reconnect to it unless I power cycle the camera. Tested with the same conditions as above.
Now I've placed the camera around 30ft from the router. Signal has to travel through at least 2 drywalls. DlinkLite app shows signal strength as 2/4 sometimes 3/4.
Anywhere from 10min to 1 hour the camera will disconnect from Wi-Fi and the only way to make it reconnect is to power cycle it.
This "not reconnecting" issue is really serious and needs to be addressed.