D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-942L => Topic started by: thedokker on July 22, 2013, 03:14:19 AM
-
Hi,
the date of the webcam is started on 2013/01/01 after the firmware upgrade and it restarts on the 2013/01/01 every time I unplug and replug power.
Is it a known bug?
How I can resolve this issues?
Thanks
-
With old firmwares the solution to this was to put the ntp server in the form of ip adress.
-
Now it works! Thanks a lot!
Last thing is to try to unplug and replug the power to see if the date starts at 2013/01/01 again or not.
I'll try it soon I hope.
Thanks again.