• March 28, 2024, 04:21:47 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Wireless Connection issues  (Read 2910 times)

Jp3848

  • Level 1 Member
  • *
  • Posts: 1
Wireless Connection issues
« on: May 17, 2013, 09:01:39 AM »

Hi there,

I've been using a couple DCS-930L cams for a few years without issue. Recently, I've lost the ability to connect wirelessly & I don't recall making any changes to my wireless config.  Here's my setup:

-linksys e4200 with WPA with a 10 digit passcode. Mixed mode 2.4ghz.

-2 DCS 930L cams with the latest firmware (1.08)

I have attempted to connect with the setup software and make it through the "disconnect Ethernet cable". The cam light remains red.

I have gone in through the manual setup (using the IP address) and have validated the setup is correct.

I have attempted to connect using the wifi protected setup. I actually get a green light for a couple seconds, but when the router stops flashing in wifi setup mode, the cam status light goes back to red.

Any thoughts as to what I'm doing wrong?

Thanks!
Logged