D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Multimedia and USB => DSM-510 => Topic started by: jocorreia on June 18, 2009, 10:46:06 AM
-
Can anybody help me? I'm a very basic tech media user and i'm having problems setting up correctly the DSM 510.
1) I'm unable to stabilize the wireless connection. DSM 510 recognizes my wireless network (WPA) but after same time it looses the connection. A simple test i make is to try to update the firmware throught the internet. It says that there no internet connection available;
2) During the time that the PC and the DSM 510 were synced i was able to test playing a avi file. It starts showing the image/sound but immediatly it becames unstable, with several cuts. Tested with an USB and it's the same. My question is: does DSM 510 supports DIVx compression or not?
3) And Subtitles? My subs are all in srt files. DSM 510 can read this file format or not?
Any help with be a blessing. Thanks in advance.
Greetings from Portugal,
Jorge
-
Boa tarde, Jorge,
eu também tenho um DSM-510, e deu-me muito trabalho configurar, mas posso tentar ajudar-te.
Primeiro, aconselho a teres tudo ligado por cabo, porque eu, primeiro, também tinha por wireless, mas a fiabilidade da ligação não te permite uma transmissão de dados fiável e com qualidade aceitável, por isso tenho o servidor ligado por cabo ao router, e o DSM-510 também.
Segundo, qual é o programa que usas para transmitir o vídeo? Se é o Media Player, esquece, porque só transmite vídeo e audio, e não conseguirás colocar as legendas. Depois, o servidor originado pelo Media Player vai abaixo muitas vezes, porque se o servidor ficar inactivo durante bastante tempo, a própria rede bloqueia-o e desliga-o, logo perdes o servidor.
Terceiro, estou a transmitir a partir de um Celeron @3200MHz (OC) com 1,25Gb de RAM, e vejo tudo perfeitamente, COM LEGENDAS. Apenas nas partes de maior bitrate dos filmes (de um BDRIP ou DVDRIP com elevado bitrate) é que, por vezes pára.
Vai à net a www.tversity.com, e faz download do TVERSITY Media server, versão FREE. Se precisares de ajuda para o configurar, pede aqui!
-
What firmware is currently on your unit?
-
@Twinsen
Viva. Em primeiro lugar, peço desculpa pela resposta tardia mas só agora é que consegui ter tempo para testar o DSM novamente. E confirma-se :'(. Por cabo já consegui fazer streaming. Não era o que desejava quando comprei a caixa (para isso tinha comprada a "caixinha" da WD) mas não consigo mesmo estabilizar o sinal wireless.
O servidor que usei foi o Windows Media Player e funcionou impecável... mas confesso que só experimentei um ficheiro AVI durante alguns minutos e que por acaso tinhas legendas e como disse, nada de legendas. Por isso instalei o TVersity para tentar ver as legendas mas não consegui fazer streaming a partir deste servidor. No entanto, não tive tempo andar a "brincar" com as configurações (questões de paternidade ;D).
Por isso, se me consegui dar umas dicas, agradecia.
@ECF
Firmware version is 1.08. I'm sure it's the latest because i have tried to update both ways, internet (while the wireless connection was engaged) and USB, and the box informed me that had nothing to update.
-
Yes the DSM-510 supports DivX compression however .srt are not supported. If you are having an issue with the video via USB that eliminate a network issue so you will want to look into the recoding settings and options used.
-
Well, format for srt subtitles was a "shoot in the dark". I knew that 510 didn't support but i have a small hope that future firmware updates will include this COMMON/WEB USED feature.
Nevertheless my wireless problem continues. I able to initialy estabelish a wireless connection but only last for 5/10 minutes. After that, the sync is lost.
-
Does this happen on all video files types and even when playing music albums?
-
I never get to that part. The sync is lost before playing the files.
-
Can you try pinging the DSM-510 from your PC? Setup a constant ping and watch it and see if the ping stops when you get the message disconnected from the server.
Ping test instructions
1. Click “Start” and goto “Run”
2. Type “cmd” and press Enter
3. Type”ping 192.168.xxx.xxx -t” (IP address of the device you are tying to ping test)
You should get replys back.
-
Sometimes Wireless DSM dies and needs restart or hard restart, is this still know problem with firmware 1.08 using wireless home network?????? Any Ideas?