Topic: Place bolt δ in hole E2C, and fasten to 13.746 Nm counter clockwise with nut #47 (Read 19712 times)

Fatman · « **on:** February 04, 2009, 09:32:14 AM »

The NetDefend firewalls are not a simple group of products to configure. I know some of you out there are flabbergasted anyone would ever have an issue, but it has come up in the past. We have some documentation available for the most common scenarios, but what I am asking of you is what scenarios would you like to see covered (either by other users or possibly even by D-Link) but aren't?

This could be anything from the simplistic (but overlooked), to the insanely complicated.

10 bonus points will be awarded to anyone who comes up with a scenario that I have not personally seen before. Just keep in mind “everything's made up and the points don't matter”.

**modified by Fatman 3 seconds after posting because I am never satisfied with something just because I post it. **

D-Link Forums

News:

Author Topic: Place bolt δ in hole E2C, and fasten to 13.746 Nm counter clockwise with nut #47 (Read 19712 times)

Fatman

Place bolt δ in hole E2C, and fasten to 13.746 Nm counter clockwise with nut #47