Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion
Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual. I have a name for my channels
What wireless modes are you using? I'm using both G and N on 2.4 and only G on 5
2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N on 5Ghz? Ok
Channel Width set for Auto 20/40Mhz or try 20Mhz only. Ok
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. I'm on channel 11 on 2.4 and channel 36 on 5
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
What wireless devices do you have connected? 2 Phones, 1 IPad, 1 Laptop, 1 Android tablet, 1 Ipod touch but not all are on at the same time,
Any cordless house phones? No home phones, only cell phones.
Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many? Yes, I will find out how many
If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, HT 20/40 Co-exhistance and Extra Wireless Protection if you have it. Recommended settings are default. Under Advanced/Advanced Wireless.