The Graveyard - Products No Longer Supported > DNS-321

Map Network Drive keeps asking for name/pass

<< < (3/3)

wdarrellr2009:
I have tried every thing that was posted in this forum. I still can not map a network drive. It work before and I disconned the drive when I tied to remap it it would not work. Is there something in a new Vista update that could be causing all of the problems. I downgraded firmware to 1.01 no help. Turned off windows firewall, AVG Antivirus software. Still no luck. What a piece of work you have here D-Link. I have use other D-Link products with no ill effects but this one stinks. Help Please.

ECF:

--- Quote from: wdarrellr2009 on July 07, 2009, 08:38:45 PM ---I have tried every thing that was posted in this forum. I still can not map a network drive. It work before and I disconned the drive when I tied to remap it it would not work. Is there something in a new Vista update that could be causing all of the problems. I downgraded firmware to 1.01 no help. Turned off windows firewall, AVG Antivirus software. Still no luck. What a piece of work you have here D-Link. I have use other D-Link products with no ill effects but this one stinks. Help Please.

--- End quote ---

No there is nothing in Vista or any update causing this issue it works perfectly well with the Vista OS. Have you tried mapping it with the Easy Search Utility as well as the Windows Map utility? Please make sure you are running the latest firmware and reset the unit to factory defaults and try to Map the volume. If you are unable to map it is usually due to a third party program blocking access to network device not allowing you to map or even access the volume sometimes.

Are you able to access the volume's and the data on the drives? 

carm1575:
Try turning off ZoneAlarm if you are running it - then try to map again.  I was getting a similar error(s), everything works great when I exited from ZoneAlarm.  I like ZoneAlarm and would appreciate it if anyone could figure out how to get the321 & ZA working together.

carm1575:
I figured out a way to get ZoneAlarm & the 321 working together.  You have to configure ZA toplace the "local" adapter into the Trusted Zone instead of the Internet Zone.  This should be fine if you are on a local subnet behind a router or two (I use two).  I suspect the same type of rule can be applied to Windows Firewall.

Black_Blade001:

--- Quote from: boldfacelies on May 21, 2009, 12:52:00 AM ---I have tried to create a network drive map for my DNS 321 and it keeps asking for name/password.

I've tried the admin, and all three users. 

All three users are under the same group.

I've enabled group read and write access and drive mapping.

The domain is the same and I make sure to change the domain everytime the pop-up comes up

dns321\\volume_1
my_domain\user
password

What am I doing wrong?!  It keeps saying that a user is logged in and that I can only have 1 session, but I'm not logged in with any other share.

--- End quote ---

I had trouble to map my 321 after adding some users in the ftp server function, but found that I was using my admin user name and password when the utility prompted for user and password to connect the drive.  Turned out I needed to use the user name and password and bam, she worked.  Hope this helps. 

Navigation

[0] Message Index

[*] Previous page