D-Link Forums
D-Link Enterprise => DGS-1100-Series => Topic started by: crusey_aus on September 10, 2020, 08:23:47 PM
-
Hello Folks,
Just wondering if it is possible to use a different port rate limit setting than the ones listed in the WebUI configuration interface (Such as 50MB/s)
How would I got about setting it
Cheers
-
The presets seem to be set for specific rates and can't not be customized.
-
In the QoS settings you can do port rate limit.
Specify the rate limit in kbps or Mbps. Or specify No Limit to remove the rate limit.
-
Interesting. Will keep this in mind.
Thank you.
-
In the QoS settings you can do port rate limit.
Specify the rate limit in kbps or Mbps. Or specify No Limit to remove the rate limit.
Hi Bud,
Using the WEBUI there is only an option of a drop down menu with various presets (16Mb, 32Mb, 64Mb etc .....)
There is no option to specify custom rates
Was thinking it may be available via command line or some other way
Cheers
-
Do you see this on your DGS?
(https://i.postimg.cc/jSDRLjgd/Screen-Shot-2020-09-12-at-10-28-14-AM.png) (https://postimg.cc/K1h6Wmhd)
Wondering if there maybe some differences between the models.
-
Yes that is what I see
Older firmware must have had the adjustable values, as I have seen them in screenshots
-
Well B31 is last version I see for the 1100 series... :-\