• April 16, 2024, 02:31:51 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Configure time and date  (Read 2187 times)

mrspaladin4rent

  • Level 1 Member
  • *
  • Posts: 2
Configure time and date
« on: July 22, 2014, 06:13:59 AM »
Every day when I connect my dcs-942L it goes back to 2013-01-01, so I have to manually change the date every time. Is there a way to fix that so it's always on the correct time?
Logged

Allen

  • Level 2 Member
  • **
  • Posts: 37
Re: Configure time and date
« Reply #1 on: July 22, 2014, 11:49:45 PM »
Do you upgrade your IP Cam to the latest firmware?
Logged

belvedere

  • Guest
Re: Configure time and date
« Reply #2 on: July 23, 2014, 02:25:37 PM »
Updating to the latest firmware is a good idea.  A good way to ensure the time and date stay correct is to set the camera to pull time from the network.

Access the camera's web server (http://cam's LAN ip address) and choose Setup --> Time and Date.  Select "Synchronize with NTP server."  You have two choices below that:

1. Set NTP server from DHCP (which is what I use to get time from my router)
2. Choose a specific NCP server such as ntp1.dlink.com

Save the settings and you won't have to worry about the time & date anymore.
Logged