• April 19, 2024, 04:34:09 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How many users / connections Dir-842 can handle when working as an access point?  (Read 5782 times)

LKHung20

  • Level 1 Member
  • *
  • Posts: 1
How many users / connections Dir-842 can handle when working as an access point?
« on: September 11, 2020, 02:35:21 AM »
Hello,
I have a Dir-842.
It works fine until the number of devices reach 20-30 then issues happen.
I am going to buy a separate router and switch Dir-842 into an access point.
So I am wondering how many users / connections that DIR-842 can handle?
Any help would be appreciated.
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: How many users / connections Dir-842 can handle when working as an access point?
« Reply #1 on: September 11, 2020, 07:52:33 AM »
There isn't one answer since there are so many factors. It all depends on bandwidth used, speed/bandwidth of clients, and environment/interference. I usually suggest around 20 clients before getting another access point added (and to use Ethernet whenever possible). Cameras and video streaming use the most bandwidth.

The 842 is 300Mbps (2.4GHz) and 866Mbps (5GHz). Remember WiFI is shared bandwidth so it does not act like an Ethernet switch where each port has dedicated bandwidth. So if you have 20 clients using the 2.4GHz band, they all can use a piece of the 300. Each client does not get 300.
Logged